[asterisk-bugs] [Asterisk-GUI 0019261]: Call failed when change the remote register SIP port

[Asterisk Bug Tracker]

The following issue has been SUBMITTED. 
====================================================================== 
https://issues.asterisk.org/view.php?id=19261 
====================================================================== 
Reported By:                learnin9
Assigned To:                
====================================================================== 
Project:                    Asterisk-GUI
Issue ID:                   19261
Category:                   General
Reproducibility:            always
Severity:                   minor
Priority:                   normal
Status:                     new
Asterisk GUI Version:       SVN 
Asterisk Version:           1.4.39.2 
JIRA:                        
SVN Branch (only for SVN checkouts, not tarball releases): N/A 
SVN Revision (number only!):  
Disclaimer on File?:        N/A 
Request Review:              
====================================================================== 
Date Submitted:             2011-05-10 10:20 CDT
Last Modified:              2011-05-10 10:20 CDT
====================================================================== 
Summary:                    Call failed when change the remote register SIP port
Description: 
  I have one asterisk system and installed the asterisk-gui in the FreeBSD
8.2 system.
  My friends gave me the SIP account and SIP server IP address,but the sip
port is 5080,I tried to register the remote sip system.From the asterisk
AMI,I found it can register it successfully,but if make a call,the call was
failed.If change the remote SIP port to 5060,the call was successful.
  The following are my testing steps:

first step:
    (1): add the SIP trunk and try to register the remote SIP
softswitch(another asterisk system.the remote SIP port is 5060)
    (2): add the dial plan,  _1XX to dial the other system's sip phone.
    (3): add a sip phone and make it to register the sip system(A)
    (4): call 100 .the two call can be connected successfully.
    please see the attachment asterisk_5060.txt
   Second step:
    (1): Make the remote SIP system port 5080
    (2): Modify the SIP trunk port 5080 and "Apply changes". (Yes, it can
register the remote sip sysyem and the remote port is 5080)
    (3): call 100, I found the SIP system send "480" error messages
     Please see the attachment asterisk_5080.txt

====================================================================== 

Issue History 
Date Modified    Username       Field                    Change               
====================================================================== 
2011-05-10 10:20 learnin9       New Issue                                    
2011-05-10 10:20 learnin9       Asterisk GUI Version      => SVN             
2011-05-10 10:20 learnin9       Asterisk Version          => 1.4.39.2        
2011-05-10 10:20 learnin9       SVN Branch (only for SVN checkouts, not tarball
releases) => N/A             
======================================================================