[asterisk-bugs] [DAHDI-linux 0018566]: Problem with driver for "Quad(4) port BRI" card (PhonicEQ). This card doesn't work with DAHDI 2.4.0

[Asterisk Bug Tracker]

A NOTE has been added to this issue. 
====================================================================== 
https://issues.asterisk.org/view.php?id=18566 
====================================================================== 
Reported By:                kondik
Assigned To:                
====================================================================== 
Project:                    DAHDI-linux
Issue ID:                   18566
Category:                   wcb4xxp/NewFeature
Reproducibility:            always
Severity:                   major
Priority:                   normal
Status:                     acknowledged
JIRA:                        
Reviewboard Link:            
====================================================================== 
Date Submitted:             2010-12-31 02:39 CST
Last Modified:              2011-01-18 07:14 CST
====================================================================== 
Summary:                    Problem with driver for "Quad(4) port BRI" card
(PhonicEQ). This card doesn't work with DAHDI 2.4.0
Description: 
I have problem with "Quad(4) port BRI" card. This is exactly this card:
http://quadbri.phoniceq.com/
Probably this is similar card to this card:
http://www.junghanns.net/en/quadBRI2_produkt.html so I tried to find
solution in this thread: https://issues.asterisk.org/view.php?id=13897 but
unfortunately those changes improve on junghanns card only.

I installed:
libpri 1.4.11.5
dahdi-linux-complete-2.4.0+2.4.0

Both libpri and dahdi was installed properly.
However during DAHDI configuration I obtain following information:

driver should be 'qozap' but is actually 'hfc4s8s_l1'
pci:0000:01:01.0      qozap+      1397:08b4 Generic Cologne ISDN card

I think that this card (1397:08b4 Generic Cologne ISDN card) should be
support by wcb4xxp driver the same as for junghanns card
('1397:08b4/1397:b520' Junghanns QuadBRI ISDN card).

Could you help me with this problem?

Thanks in advance,
Regards,
Kondik
====================================================================== 

---------------------------------------------------------------------- 
 (0130589) tzafrir (manager) - 2011-01-18 07:14
 https://issues.asterisk.org/view.php?id=18566#c130589 
---------------------------------------------------------------------- 
As seen on IRC:

Output from dahdi_hardware with a BRI card from the same vendor:

pci:0000:05:06.0     wcb4xxp+     1397:08b4 Digium Wildcard B410P or
compatible


This is the DAHDI package of Elastix 2.03, so I figure it is DAHDI 2.4.0
(linux+tools). IIRC it has no relevant patches in that area.

So I suspect that DAHDI is OK, and Asterisk/chan_dahdi needs to be
properly set up (Asterisk configuration issue). 

Issue History 
Date Modified    Username       Field                    Change               
====================================================================== 
2011-01-18 07:14 tzafrir        Note Added: 0130589                          
======================================================================