[asterisk-bugs] [DAHDI-linux 0018832]: [patch] proc does not show ClockSource when using multiple cards that are not connected by a timing cable

[Asterisk Bug Tracker]

The following issue has been ASSIGNED. 
====================================================================== 
https://issues.asterisk.org/view.php?id=18832 
====================================================================== 
Reported By:                mspiceland
Assigned To:                sruffell
====================================================================== 
Project:                    DAHDI-linux
Issue ID:                   18832
Category:                   General
Reproducibility:            always
Severity:                   minor
Priority:                   normal
Status:                     assigned
JIRA:                        
Reviewboard Link:            
====================================================================== 
Date Submitted:             2011-02-17 15:35 CST
Last Modified:              2011-04-15 11:07 CDT
====================================================================== 
Summary:                    [patch] proc does not show ClockSource when using
multiple cards that are not connected by a timing cable
Description: 
In my specific case, I have two quad T1/E1 TE405P cards in a system and
they are not connected with a timing cable.  The /proc output for dahdi
appends a "ClockSource" designator to show which span is the currently
selected timing source.  When using multiple cards without a timing cable,
each of the cards has its own independent clock source.  There is an issue
for this case where only the ClockSource for the first card is shown.  This
change resolves this issue and it is now show for each card in the system.

Before this change:

# cat /proc/dahdi/* | grep -i span
Span 1: TE4/1/1 "T4XXP (PCI) Card 1 Span 1" (MASTER) B8ZS/ESF ClockSource

Span 2: TE4/1/2 "T4XXP (PCI) Card 1 Span 2" B8ZS/ESF 
Span 3: TE4/1/3 "T4XXP (PCI) Card 1 Span 3" B8ZS/ESF 
Span 4: TE4/1/4 "T4XXP (PCI) Card 1 Span 4" B8ZS/ESF 
Span 5: TE4/0/1 "T4XXP (PCI) Card 0 Span 1" B8ZS/ESF 
Span 6: TE4/0/2 "T4XXP (PCI) Card 0 Span 2" B8ZS/ESF 
Span 7: TE4/0/3 "T4XXP (PCI) Card 0 Span 3" B8ZS/ESF 
Span 8: TE4/0/4 "T4XXP (PCI) Card 0 Span 4" B8ZS/ESF

After this change:
# cat /proc/dahdi/* | grep -i span
Span 1: TE4/1/1 "T4XXP (PCI) Card 1 Span 1" (MASTER) B8ZS/ESF ClockSource

Span 2: TE4/1/2 "T4XXP (PCI) Card 1 Span 2" B8ZS/ESF 
Span 3: TE4/1/3 "T4XXP (PCI) Card 1 Span 3" B8ZS/ESF 
Span 4: TE4/1/4 "T4XXP (PCI) Card 1 Span 4" B8ZS/ESF 
Span 5: TE4/0/1 "T4XXP (PCI) Card 0 Span 1" B8ZS/ESF ClockSource 
Span 6: TE4/0/2 "T4XXP (PCI) Card 0 Span 2" B8ZS/ESF 
Span 7: TE4/0/3 "T4XXP (PCI) Card 0 Span 3" B8ZS/ESF 
Span 8: TE4/0/4 "T4XXP (PCI) Card 0 Span 4" B8ZS/ESF 

I tested this change while unplugging and replugging spans to ensure it
works as expected for my case.  I'm sharing this in case someone wants to
test with different hardware (e.g. B410P, HA8, etc) because this is in
dahdi-base.
====================================================================== 

Issue History 
Date Modified    Username       Field                    Change               
====================================================================== 
2011-04-15 11:07 sruffell       Status                   new => assigned     
2011-04-15 11:07 sruffell       Assigned To               => sruffell        
======================================================================