[asterisk-bugs] [Asterisk 0017973]: Asterisk messes up progress indication on q.931 ALERTING message

Asterisk Bug Tracker noreply at bugs.digium.com
Tue Sep 21 00:58:34 CDT 2010


A NOTE has been added to this issue. 
====================================================================== 
https://issues.asterisk.org/view.php?id=17973 
====================================================================== 
Reported By:                jpokorny
Assigned To:                rmudgett
====================================================================== 
Project:                    Asterisk
Issue ID:                   17973
Category:                   Channels/chan_dahdi
Reproducibility:            have not tried
Severity:                   major
Priority:                   normal
Status:                     feedback
Target Version:             1.6.2.15
Asterisk Version:           Older 1.6.2 - please test a newer version 
JIRA:                       SWP-2193 
Regression:                 No 
Reviewboard Link:            
SVN Branch (only for SVN checkouts, not tarball releases): N/A 
SVN Revision (number only!):  
Request Review:              
====================================================================== 
Date Submitted:             2010-09-09 05:10 CDT
Last Modified:              2010-09-21 00:58 CDT
====================================================================== 
Summary:                    Asterisk messes up progress indication on q.931
ALERTING message
Description: 
I am using asterisk with libpri 1.4.11, dahdi 2.3.0.1 and two ISDN PRI E1
interfaces. Asterisk seems to have trouble with some outgoing calls
signalization. Scenario:

1) inbound call to asterisk from user (SETUP and CALL PROCEEDING with
user)
2) outbound call is dialed (SETUP and CALL PROCEEDING to PBX)
3) ALERTING message comes on the outbound channel, with no progress
indication
4) ALERTING is sent to inbound channel, WITH progress indication 8 (Inband
information or appropriate pattern now available)
5) but no sound is generated on the inbound channel
6) user hears nothing, few seconds later, he is connected

This scenario is catched up in the attached log. I recorded channels using
dahdi_monitor to confirm the sound is not generated. Asterisk should either
send ALERTING with no progress or generate the sound.

Unfortunately PBX does usually follow the ALERTING message with PROGRESS
and inband audio, which works ok, so I can't reproduce it easily. I am not
sure if this is chan_dahdi or libpri issue.

====================================================================== 

---------------------------------------------------------------------- 
 (0127176) jpokorny (reporter) - 2010-09-21 00:58
 https://issues.asterisk.org/view.php?id=17973#c127176 
---------------------------------------------------------------------- 
I have added complete config files as attachments. Short version:

system.conf:
loadzone = us
defaultzone = us

chan_dahdi.conf
tonezone not set 

Issue History 
Date Modified    Username       Field                    Change               
====================================================================== 
2010-09-21 00:58 jpokorny       Note Added: 0127176                          
======================================================================




More information about the asterisk-bugs mailing list