[asterisk-bugs] [DAHDI-linux 0018142]: The TE122 and dadi produces an unusual high load

[Asterisk Bug Tracker]

A NOTE has been added to this issue. 
====================================================================== 
https://issues.asterisk.org/view.php?id=18142 
====================================================================== 
Reported By:                foxfire
Assigned To:                
====================================================================== 
Project:                    DAHDI-linux
Issue ID:                   18142
Category:                   wcte12xp
Reproducibility:            always
Severity:                   major
Priority:                   normal
Status:                     feedback
JIRA:                        
Reviewboard Link:            
====================================================================== 
Date Submitted:             2010-10-14 08:33 CDT
Last Modified:              2010-10-14 10:03 CDT
====================================================================== 
Summary:                    The TE122 and dadi produces an unusual high load
Description: 
When starting dahdi_linux and there is a TE122 installed in the machine in
a few seconds the load raizes from 0.00 to over 0.50 .
This happens always, i have no problem with any other digium card only the
TE122.
I stopped all services and only started dahdi.
Disabling the mg2 echocancler does not help.
I consider this major because call quality is affected due to the load
increasing to values.

====================================================================== 

---------------------------------------------------------------------- 
 (0128023) foxfire (reporter) - 2010-10-14 10:03
 https://issues.asterisk.org/view.php?id=18142#c128023 
---------------------------------------------------------------------- 
If i shutdown everything misdn, dahdi and asterisk the machine behaves
normal, but as soon as i start dahdi the load appears. 
Load averages in linux are not in % it is a weird number.
Normally it should be 0.00 , but once the load raises it raises over
0.50.
If it goes over 1.00 the machine theoretically looses real-time capacity.
Because of the initial load already is high this happens very often. 

Issue History 
Date Modified    Username       Field                    Change               
====================================================================== 
2010-10-14 10:03 foxfire        Note Added: 0128023                          
======================================================================