[asterisk-bugs] [DAHDI-linux 0017351]: dahdi doesn't get sangoma alarms

[Asterisk Bug Tracker]

The following issue has been CLOSED 
====================================================================== 
https://issues.asterisk.org/view.php?id=17351 
====================================================================== 
Reported By:                horape
Assigned To:                
====================================================================== 
Project:                    DAHDI-linux
Issue ID:                   17351
Category:                   dahdi (the module)
Reproducibility:            always
Severity:                   major
Priority:                   normal
Status:                     closed
JIRA:                        
Reviewboard Link:            
Resolution:                 not fixable
Fixed in Version:           
====================================================================== 
Date Submitted:             2010-05-17 15:43 CDT
Last Modified:              2010-05-17 16:09 CDT
====================================================================== 
Summary:                    dahdi doesn't get sangoma alarms
Description: 
Using a sangoma A104 card. When a span is alarmed, wanrouter says so and
dahdi_tool says no alarms present.

HC0008:~# wanrouter status
wanpipe3    | AFT TE1  | N/A     | Disconnected  |

dahdi_tool:
wanpipe3 card 2
Current Alarms:     No alarms.

HC0008:~# wanpipemon -i w3g1  -c Ta
***** w3g1: E1 Alarms (Framer) *****
ALOS:   OFF     | LOS:  OFF
RED:    ON      | AIS:  ON
LOF:    ON      | RAI:  ON

(In this case I'm forcing the span down from the other side, but same
thing happens when I just disconnect the cable)
====================================================================== 

---------------------------------------------------------------------- 
 (0122038) tilghman (administrator) - 2010-05-17 16:09
 https://issues.asterisk.org/view.php?id=17351#c122038 
---------------------------------------------------------------------- 
Sorry, dahdi doesn't actually support that hardware.  The drivers only work
with 3rd party patches, so you'll need to report this issue to the source
of the 3rd party patches. 

Issue History 
Date Modified    Username       Field                    Change               
====================================================================== 
2010-05-17 16:09 tilghman       Note Added: 0122038                          
2010-05-17 16:09 tilghman       Status                   new => closed       
2010-05-17 16:09 tilghman       Resolution               open => not fixable 
======================================================================