[asterisk-bugs] [DAHDI-linux 0017351]: dahdi doesn't get sangoma alarms

[Asterisk Bug Tracker]

The following issue has been SUBMITTED. 
====================================================================== 
https://issues.asterisk.org/view.php?id=17351 
====================================================================== 
Reported By:                horape
Assigned To:                
====================================================================== 
Project:                    DAHDI-linux
Issue ID:                   17351
Category:                   dahdi (the module)
Reproducibility:            always
Severity:                   major
Priority:                   normal
Status:                     new
JIRA:                        
Reviewboard Link:            
====================================================================== 
Date Submitted:             2010-05-17 15:43 CDT
Last Modified:              2010-05-17 15:43 CDT
====================================================================== 
Summary:                    dahdi doesn't get sangoma alarms
Description: 
Using a sangoma A104 card. When a span is alarmed, wanrouter says so and
dahdi_tool says no alarms present.

HC0008:~# wanrouter status
wanpipe3    | AFT TE1  | N/A     | Disconnected  |

dahdi_tool:
wanpipe3 card 2
Current Alarms:     No alarms.

HC0008:~# wanpipemon -i w3g1  -c Ta
***** w3g1: E1 Alarms (Framer) *****
ALOS:   OFF     | LOS:  OFF
RED:    ON      | AIS:  ON
LOF:    ON      | RAI:  ON

(In this case I'm forcing the span down from the other side, but same
thing happens when I just disconnect the cable)
====================================================================== 

Issue History 
Date Modified    Username       Field                    Change               
====================================================================== 
2010-05-17 15:43 horape         New Issue                                    
======================================================================