[asterisk-bugs] [DAHDI-linux 0017289]: VPMADT032 is crashing after upgarde to 2.3.0

[Asterisk Bug Tracker]

A NOTE has been added to this issue. 
====================================================================== 
https://issues.asterisk.org/view.php?id=17289 
====================================================================== 
Reported By:                isaacgal
Assigned To:                
====================================================================== 
Project:                    DAHDI-linux
Issue ID:                   17289
Category:                   wcte12xp
Reproducibility:            always
Severity:                   major
Priority:                   normal
Status:                     new
JIRA:                        
Reviewboard Link:            
====================================================================== 
Date Submitted:             2010-05-05 03:09 CDT
Last Modified:              2010-05-05 07:17 CDT
====================================================================== 
Summary:                    VPMADT032 is crashing after upgarde to 2.3.0
Description: 
just finished upgrading from 2.1.04 to 2.3.0 and calls strated to drop from
time to time. 

I noticed the following in the console log:

wcte12xp 0000:02:08.0: VPMADT032 is reenabled.
wcte12xp 0000:02:08.0: VPMADT032 is non-responsive.  Resetting.
wcte12xp 0000:02:08.0: VPM present and operational (Firmware version 120)
wcte12xp 0000:02:08.0: Error pinging DSP (2)
wcte12xp 0000:02:08.0: Failed to configure the ports.  Retrying.
wcte12xp 0000:02:08.0: VPM present and operational (Firmware version 120)
wcte12xp 0000:02:08.0: VPMADT032 is reenabled.
wcte12xp 0000:02:08.0: VPMADT032 is non-responsive.  Resetting.
wcte12xp 0000:02:08.0: VPM present and operational (Firmware version 120)
wcte12xp 0000:02:08.0: VPMADT032 is reenabled.
wcte12xp 0000:02:08.0: VPMADT032 is non-responsive.  Resetting.
wcte12xp 0000:02:08.0: VPM present and operational (Firmware version 120)
wcte12xp 0000:02:08.0: VPMADT032 is reenabled.
wcte12xp 0000:02:08.0: VPMADT032 is non-responsive.  Resetting.
wcte12xp 0000:02:08.0: VPM present and operational (Firmware version 120)
wcte12xp 0000:02:08.0: VPMADT032 is reenabled.
wcte12xp 0000:02:08.0: VPMADT032 is non-responsive.  Resetting.
wcte12xp 0000:02:08.0: VPM present and operational (Firmware version 120)
wcte12xp 0000:02:08.0: VPMADT032 is reenabled.
wcte12xp 0000:02:08.0: VPMADT032 is non-responsive.  Resetting.
wcte12xp 0000:02:08.0: VPM present and operational (Firmware version 120)
wcte12xp 0000:02:08.0: VPMADT032 is reenabled.
wcte12xp 0000:02:08.0: VPMADT032 is non-responsive.  Resetting.

i guess there is a bug in the 2.3.0 and VPMADT032 that causes it because
going back to 2.2.0.2 and this issue doesnt happen anymore eventhough new
issues arrived with faxing and echo cancellation, but atleast calls are not
dropping anymore.

the VPMADT032 firmware is 120
asterisk 1.4.30 


====================================================================== 

---------------------------------------------------------------------- 
 (0121408) isaacgal (reporter) - 2010-05-05 07:17
 https://issues.asterisk.org/view.php?id=17289#c121408 
---------------------------------------------------------------------- 
i also noticed when vpmsupport=0 on dahdi 2.3 issue doesnt happen. 
so we can narrow this down to the vpm module support in dahdi 2.3 

vpm module totaly functioning on dahdi 2.2.0.2 so this isnt a bad hardware
case.


regards 

Issue History 
Date Modified    Username       Field                    Change               
====================================================================== 
2010-05-05 07:17 isaacgal       Note Added: 0121408                          
======================================================================