[asterisk-bugs] [DAHDI-tools 0016814]: asterisk won't start - dahdi-linux-complete-2.2.1+2.2.1

[Asterisk Bug Tracker]

A NOTE has been added to this issue. 
====================================================================== 
https://issues.asterisk.org/view.php?id=16814 
====================================================================== 
Reported By:                jensvb
Assigned To:                
====================================================================== 
Project:                    DAHDI-tools
Issue ID:                   16814
Category:                   Channels/chan_dahdi
Reproducibility:            always
Severity:                   major
Priority:                   normal
Status:                     acknowledged
JIRA:                        
Reviewboard Link:            
====================================================================== 
Date Submitted:             2010-02-11 14:28 CST
Last Modified:              2010-03-29 14:03 CDT
====================================================================== 
Summary:                    asterisk won't start -
dahdi-linux-complete-2.2.1+2.2.1
Description: 
Hi All,

I stumbled across a problem with "dahdi-linux-complete-2.2.1+2.2.1", I
happen to have 1 of 6 PRIs down at the moment.

If I try and start asterisk I get the "Asterisk has detected a problem
with your DAHDI configuration and will shutdown for your protection" error
message.

I downgraded again to "dahdi-linux-complete-2.2.0.2+2.2.0" (no other
change) and was able start asterisk successfully (albeit with 1 PRI down)

Thanks & Regards
Jens

PS: I am using

  asterisk-1.6.0.22
  asterisk-addons-1.6.0.4
  libpri-1.4.10.2

on Centos 5.4 x86_64.....




  

====================================================================== 

---------------------------------------------------------------------- 
 (0119987) atiracom (reporter) - 2010-03-29 14:03
 https://issues.asterisk.org/view.php?id=16814#c119987 
---------------------------------------------------------------------- 
I have the same problem, here's the requested output:

[trixbox1.localdomain asterisk]# head -n 1 /proc/dahdi/*
==> /proc/dahdi/1 <==
Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER) 

==> /proc/dahdi/2 <==
Span 2: TE2/0/2 "T2XXP (PCI) Card 0 Span 2" 

==> /proc/dahdi/3 <==
Span 3: WCTDM/0 "Wildcard TDM410P Board 1" 
[trixbox1.localdomain asterisk]# dahdi_test -c 3 -v
Opened pseudo dahdi interface, measuring accuracy...

And yes, it hung at this point. 

Issue History 
Date Modified    Username       Field                    Change               
====================================================================== 
2010-03-29 14:03 atiracom       Note Added: 0119987                          
======================================================================