[asterisk-bugs] [DAHDI-linux 0017529]: Severe clicking, popping and talkoff when inbound call from SIP

[Asterisk Bug Tracker]

A NOTE has been added to this issue. 
====================================================================== 
https://issues.asterisk.org/view.php?id=17529 
====================================================================== 
Reported By:                basildane
Assigned To:                sruffell
====================================================================== 
Project:                    DAHDI-linux
Issue ID:                   17529
Category:                   dahdi (the module)
Reproducibility:            always
Severity:                   major
Priority:                   normal
Status:                     assigned
JIRA:                        
Reviewboard Link:            
====================================================================== 
Date Submitted:             2010-06-18 07:52 CDT
Last Modified:              2010-06-20 15:31 CDT
====================================================================== 
Summary:                    Severe clicking, popping and talkoff when inbound
call from SIP
Description: 
Under certain conditions, calls to Dahdi channels are full of clicks, pops,
and spurious DTMF digits.  (Usually DTMF-1 for me).

The conditions to reproduce are:
Answer and incoming call from a SIP provider on an analog extension.

Other types of calls are clean and have no problems.  For example:
SIP calls answered on SIP extensions.
SIP extension answering call from analog extension.
SIP extension answering call from SIP, transferred to analog.

====================================================================== 

---------------------------------------------------------------------- 
 (0123650) basildane (reporter) - 2010-06-20 15:31
 https://issues.asterisk.org/view.php?id=17529#c123650 
---------------------------------------------------------------------- 
I recompiled and confirmed installation of dahdi tools.
I also ran fxotune right from the source folder.

This is my output from dahdi_cfg:
DAHDI Tools Version - 2.3.0

DAHDI Version: 2.3.0.1
Echo Canceller(s): MG2
Configuration
======================


Channel map:

Channel 01: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 01)
Channel 02: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 02)
Channel 03: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 03)
Channel 04: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 04)

4 channels to configure.

Setting echocan for channel 1 to mg2
Setting echocan for channel 2 to mg2
Setting echocan for channel 3 to mg2
Setting echocan for channel 4 to mg2 

Issue History 
Date Modified    Username       Field                    Change               
====================================================================== 
2010-06-20 15:31 basildane      Note Added: 0123650                          
======================================================================