[asterisk-bugs] [Asterisk 0017725]: Issue with transfers in chan_skinny

[Asterisk Bug Tracker]

The following issue has been UPDATED. 
====================================================================== 
https://issues.asterisk.org/view.php?id=17725 
====================================================================== 
Reported By:                salecha
Assigned To:                
====================================================================== 
Project:                    Asterisk
Issue ID:                   17725
Category:                   Channels/chan_skinny
Reproducibility:            always
Severity:                   crash
Priority:                   normal
Status:                     acknowledged
Asterisk Version:           SVN 
JIRA:                        
Regression:                 No 
Reviewboard Link:            
SVN Branch (only for SVN checkouts, not tarball releases): N/A 
SVN Revision (number only!):  
Request Review:              
====================================================================== 
Date Submitted:             2010-07-27 06:58 CDT
Last Modified:              2010-07-27 12:32 CDT
====================================================================== 
Summary:                    Issue with transfers in chan_skinny
Description: 
Bug in making the transfer skinny. the error occurred as follows:

scenario: two SIP IP phones (2803 and 2850) and a Cisco 7910 (Ext. 2410)

<ol>
<li>From the Cisco 7910 phone (Ext. 2410) call the extension 2850.</li>
<li>communication is set correctly.</li>
<li>Press the transfer key on the Cisco 7910 to make the transfer and
extension 2850 is on hold with music.</li>
<li>The Cisco 7910 I have a dial tone and dial extension 2803.</li>
<li>The 2803 extension accepts the call and establishing communication
with the extension 2410.</li>
<li>Well, if I hang up the extension now 2410 (Cisco 7910) the transfer is
done correctly.</li>
</ol>

The error is shown in item 6 as follows:

If instead of replacing the call to make the transfer, press the
"transfer", the transfer is performed but the Cisco 7910 is in an unusable
state, and shows me the display is connected with the 2850 extension that
is at that first call. 

====================================================================== 

Issue History 
Date Modified    Username       Field                    Change               
====================================================================== 
2010-07-27 12:32 lmadsen        Description Updated                          
2010-07-27 12:32 lmadsen        Additional Information Updated                  
 
======================================================================