[asterisk-bugs] [LibPRI 0017360]: LibPRI problem with restart of PBX processor (Testing SVN 1688)

[Asterisk Bug Tracker]

A NOTE has been added to this issue. 
====================================================================== 
https://issues.asterisk.org/view.php?id=17360 
====================================================================== 
Reported By:                shawkris
Assigned To:                rmudgett
====================================================================== 
Project:                    LibPRI
Issue ID:                   17360
Category:                   General
Reproducibility:            have not tried
Severity:                   minor
Priority:                   normal
Status:                     assigned
Asterisk Version:           1.4.30 
JIRA:                       SWP-1680 
libpri Version:             I did not set the version. :( 
SVN Branch (only for SVN checkouts, not tarball releases): N/A 
SVN Revision (number only!): 1688 
Disclaimer on File?:        N/A 
Request Review:              
====================================================================== 
Date Submitted:             2010-05-19 07:57 CDT
Last Modified:              2010-08-19 16:56 CDT
====================================================================== 
Summary:                    LibPRI problem with restart of PBX processor
(Testing SVN 1688)
Description: 
Asterisk is connected to legacy Siemens PBX. PBX has dual CPU and switches
over active/passive processors at (or close to) 00:00.

During the switchover, the link stays up but the PBX sends SABME. Asterisk
should clear state to restart q921. A few seconds after the first call
comes in, we see the legacy PBX drops the link and tries to re-establish -
it normally does this after a protocol error (timer expiry etc).

I will try and reproduce with pri debugging enabled.
====================================================================== 

---------------------------------------------------------------------- 
 (0126175) shawkris (reporter) - 2010-08-19 16:56
 https://issues.asterisk.org/view.php?id=17360#c126175 
---------------------------------------------------------------------- 
Looking at the logs again after you mentioned T309. This was set to 6
seconds in the config, but it looks like the channels were hung-up as soon
as the alarm was received. Am I reading that wrong? 

Issue History 
Date Modified    Username       Field                    Change               
====================================================================== 
2010-08-19 16:56 shawkris       Note Added: 0126175                          
======================================================================