[asterisk-bugs] [DAHDI-linux 0015724]: When running Dahdi-Linux 2.2.0.2 with VPMADT032 console is full of PRI got event: HDLC Abort (6) on Primary D-CHANNEL
Asterisk Bug Tracker
noreply at bugs.digium.com
Tue Sep 22 16:05:57 CDT 2009
A NOTE has been added to this issue.
======================================================================
https://issues.asterisk.org/view.php?id=15724
======================================================================
Reported By: isaacgal
Assigned To: sruffell
======================================================================
Project: DAHDI-linux
Issue ID: 15724
Category: dahdi (the module)
Reproducibility: always
Severity: major
Priority: normal
Status: feedback
JIRA:
======================================================================
Date Submitted: 2009-08-15 17:03 CDT
Last Modified: 2009-09-22 16:05 CDT
======================================================================
Summary: When running Dahdi-Linux 2.2.0.2 with VPMADT032
console is full of PRI got event: HDLC Abort (6) on Primary D-CHANNEL
Description:
going back to 2.1.0.4 and the problem is gone.
this issue was reported by alecdavid in 0015498 and it is NOT fixed and
should not have been merged into 2.2.0.2.
======================================================================
----------------------------------------------------------------------
(0111224) isaacgal (reporter) - 2009-09-22 16:05
https://issues.asterisk.org/view.php?id=15724#c111224
----------------------------------------------------------------------
sorry, my mistake, i took it output from the wrong log file.
i just reinstalled the 2.2.0.2 and this is the dmesg output:
wcte12xp: VPM present and operational (Firmware version 117)
wcte12xp: Setting up global serial parameters for E1
ACPI: PCI interrupt for device 0000:02:08.0 disabled
PCI: Enabling device 0000:02:08.0 (0350 -> 0353)
ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 16 (level, low) -> IRQ 169
wcte12xp: VPM present and operational (Firmware version 117)
wcte12xp: Setting up global serial parameters for E1
wcte12xp: Found a Wildcard TE121
dahdi_transcode: Loaded.
the distro is based on elastix but i removed all rpms and built
asterisk/dahdi from source since elastix repos wasnt updated enough at the
time i installed the box. needed a few issues resolved urgently.
anyway,. the systems looks stable now with no HDLC errors. last time it
happend about 12 hours after restarting asterisk, it begins with horrible
noise on all channels, inbound calls dropped and outbound calls are 50/50
chance of droping.
i enabled intense logging so lets wait till it happens again and i will
post the logs.
thanks
Issue History
Date Modified Username Field Change
======================================================================
2009-09-22 16:05 isaacgal Note Added: 0111224
======================================================================
More information about the asterisk-bugs
mailing list