[asterisk-bugs] [DAHDI-linux 0015931]: Dial() command do not detect hangup during extension call

[Asterisk Bug Tracker]

The following issue requires your FEEDBACK. 
====================================================================== 
https://issues.asterisk.org/view.php?id=15931 
====================================================================== 
Reported By:                Francis Brosnan
Assigned To:                
====================================================================== 
Project:                    DAHDI-linux
Issue ID:                   15931
Category:                   wctdm
Reproducibility:            always
Severity:                   minor
Priority:                   normal
Status:                     feedback
JIRA:                        
====================================================================== 
Date Submitted:             2009-09-22 09:01 CDT
Last Modified:              2009-09-22 09:23 CDT
====================================================================== 
Summary:                    Dial() command do not detect hangup during extension
call
Description: 
If we receive a call from the analogic device (TDM410P), it gets answered
correctly, but if the caller hangups during Dial() command is ringing to
default extension, this hangup is not detect and local extension keeps on
ringing until someone pick up the phone (or pick the extension) or timeout
is reached.


====================================================================== 

---------------------------------------------------------------------- 
 (0111176) lmadsen (administrator) - 2009-09-22 09:23
 https://issues.asterisk.org/view.php?id=15931#c111176 
---------------------------------------------------------------------- 
This probably still has something to do with the hangup detection -- I
mean, this is an analog line, and thus there is only so much disconnect
supervision that can be done here.

It doesn't happen with the ISDN line because it is a digital circuit.

As I'm not 100% sure how to debug these kinds of issues (since I'm more
into SIP and such), I don't know what I need to ask for.

Lets start with a console output, along with some additional debugging
information such as the configuration for your hardware and such.

The console output should have debugging enabled per logger.conf along
with 'core set debug 10' 

Issue History 
Date Modified    Username       Field                    Change               
====================================================================== 
2009-09-22 09:23 lmadsen        Note Added: 0111176                          
2009-09-22 09:23 lmadsen        Status                   new => feedback     
======================================================================