[asterisk-bugs] [DAHDI-linux 0014261]: [patch] Generate VMWI neon pulses from FXS module to light NEON lamp on newer 'non intellegent phone'

[Asterisk Bug Tracker]

A NOTE has been added to this issue. 
====================================================================== 
https://issues.asterisk.org/view.php?id=14261 
====================================================================== 
Reported By:                alecdavis
Assigned To:                dbailey
====================================================================== 
Project:                    DAHDI-linux
Issue ID:                   14261
Category:                   wctdm/NewFeature
Reproducibility:            always
Severity:                   feature
Priority:                   normal
Status:                     assigned
====================================================================== 
Date Submitted:             2009-01-16 15:03 CST
Last Modified:              2009-09-16 06:13 CDT
====================================================================== 
Summary:                    [patch] Generate VMWI neon pulses from FXS module to
light NEON lamp on newer 'non intellegent phone'
Description: 
Add Message Waiting Indicator method to light NEON lamp on low cost phones
with integrated Neon Lamp

Using /etc/dahdi/chan_dahdi.conf keyword mwisendtype=hvac

====================================================================== 

---------------------------------------------------------------------- 
 (0110768) alecdavis (reporter) - 2009-09-16 06:13
 https://issues.asterisk.org/view.php?id=14261#c110768 
---------------------------------------------------------------------- 
Doug:
Regarding your concerns about the setting of the ring generator to neon
mode in the interrupt, for the wctdm24xxp based cards.

You'll have noticed if you have a message that the Neon comes ON when you
go OnHook, then goes OFF for the FSK spill, then back ON after the ohttimer
expires.

The above seems a bit messy for the average user.

How about, we set the DAHDI_VMWI at the end of the state machine '
mwi_send_process_buffer', and remove the ringgenerator setting in the
interrupt.

So the states become
   1. RPAS SEND if configured (mwisendtype=rpas)
   2. RPAS PAUSE 
   3. MWI_SEND_SPILL if configured (mwisendtype=nofsk could prevent it)
   4. DAHDI_VMWI SET if configured (mwisendtype=lrev,neon) 

Issue History 
Date Modified    Username       Field                    Change               
====================================================================== 
2009-09-16 06:13 alecdavis      Note Added: 0110768                          
======================================================================