[asterisk-bugs] [Asterisk 0016151]: DIGITAL calls across a B410P connect, but no data transfer

[Asterisk Bug Tracker]

A NOTE has been added to this issue. 
====================================================================== 
https://issues.asterisk.org/view.php?id=16151 
====================================================================== 
Reported By:                alecdavis
Assigned To:                
====================================================================== 
Project:                    Asterisk
Issue ID:                   16151
Category:                   Channels/chan_dahdi
Reproducibility:            always
Severity:                   block
Priority:                   normal
Status:                     new
Asterisk Version:           SVN 
JIRA:                        
Regression:                 No 
Reviewboard Link:            
SVN Branch (only for SVN checkouts, not tarball releases): N/A 
SVN Revision (number only!): 226270 
Request Review:              
====================================================================== 
Date Submitted:             2009-10-29 04:57 CDT
Last Modified:              2009-10-29 05:01 CDT
====================================================================== 
Summary:                    DIGITAL calls across a B410P connect, but no data
transfer
Description: 
When placing calls from port 1 of a B410P to port 2, the call appears to
connect, but not data transfers.

Both ports are set to NT mode, with terminating resistor switched on.

dialplan code:
exten => _82XX,1,Dial(DAHDI/g4d/${EXTEN})

====================================================================== 

---------------------------------------------------------------------- 
 (0112893) alecdavis (reporter) - 2009-10-29 05:01
 https://issues.asterisk.org/view.php?id=16151#c112893 
---------------------------------------------------------------------- 
attached digital-call.txt
of a failed call from port 1 to port 2.
Although they appear to connect up fine, there is not data transfer
happening. 

The same 2 routers, when connected to 2 ports of a Jtec QBRM card, without
any configuration changes work fine. 

Issue History 
Date Modified    Username       Field                    Change               
====================================================================== 
2009-10-29 05:01 alecdavis      Note Added: 0112893                          
======================================================================