[asterisk-bugs] [Asterisk 0014434]: [patch] Dahdi does not wait for wink on outbound calls before dialing DTMF with Signalling type = em_w

Asterisk Bug Tracker noreply at bugs.digium.com
Fri May 22 12:36:23 CDT 2009


A NOTE has been added to this issue. 
====================================================================== 
https://issues.asterisk.org/view.php?id=14434 
====================================================================== 
Reported By:                araasch
Assigned To:                rmudgett
====================================================================== 
Project:                    Asterisk
Issue ID:                   14434
Category:                   Channels/chan_dahdi
Reproducibility:            always
Severity:                   major
Priority:                   normal
Status:                     assigned
Asterisk Version:           1.6.0.5 
Regression:                 No 
SVN Branch (only for SVN checkouts, not tarball releases): N/A 
SVN Revision (number only!):  
Request Review:              
====================================================================== 
Date Submitted:             2009-02-08 15:18 CST
Last Modified:              2009-05-22 12:36 CDT
====================================================================== 
Summary:                    [patch] Dahdi does not wait for wink on outbound
calls before dialing DTMF with Signalling type = em_w
Description: 
No provision for proper handling of the E&M wink start protocol exists in
chan_dahdi.c for outbound dialing from Asterisk.  The switch statement in
chan_dahdi.c lines 1950 and 1951 treat signalling types SIG_EMWINK and
SIG_EM exactly the same.

Asterisk should first take the channel offhook, wait for a wink from the
far end, then dial.

As it is, it takes the channel offhook, and immediately dials.

This is correct for E&M Immediate Start, but not for E&M Wink Start.

This was first reported 2005-03-15 with tracker id of 3772 which described
the problem in chan_zap.c

It appears no further action was taken.

This behavior has been verified with T1 test equipment.

I checked the code on the online Doxygen system to determine if any
further updates had addressed this issue, and it appears that none has.

Thanks.
======================================================================
Relationships       ID      Summary
----------------------------------------------------------------------
related to          0003772 chan_zap does not wait for wink on E&am...
====================================================================== 

---------------------------------------------------------------------- 
 (0105320) lmadsen (administrator) - 2009-05-22 12:36
 https://issues.asterisk.org/view.php?id=14434#c105320 
---------------------------------------------------------------------- 
I've assigned this to Richard in the hopes he can move this issue forward.
Thanks! 

Issue History 
Date Modified    Username       Field                    Change               
====================================================================== 
2009-05-22 12:36 lmadsen        Note Added: 0105320                          
======================================================================




More information about the asterisk-bugs mailing list