[asterisk-bugs] [DAHDI-linux 0015010]: CID timed out waiting for ring. Executing simple switch

[Asterisk Bug Tracker]

A NOTE has been added to this issue. 
====================================================================== 
http://bugs.digium.com/view.php?id=15010 
====================================================================== 
Reported By:                uxbod
Assigned To:                
====================================================================== 
Project:                    DAHDI-linux
Issue ID:                   15010
Category:                   wctdm
Reproducibility:            always
Severity:                   major
Priority:                   normal
Status:                     new
====================================================================== 
Date Submitted:             2009-05-01 03:52 CDT
Last Modified:              2009-05-01 09:19 CDT
====================================================================== 
Summary:                    CID timed out waiting for ring. Executing simple
switch
Description: 
-- Starting simple switch on 'DAHDI/1-1'
[May  1 09:44:47] NOTICE[18508]: chan_dahdi.c:7253 ss_thread: Got event 17
(Polarity Reversal)...
[May  1 09:44:49] WARNING[18508]: chan_dahdi.c:7311 ss_thread: CID timed
out waiting for ring. Exiting simple switch
    -- Hungup 'DAHDI/1-1'

This appears to be very similar too
http://bugs.digium.com/view.php?id=12531

I have also tried downgrading to 2.0 with the same result.
====================================================================== 

---------------------------------------------------------------------- 
 (0104019) uxbod (reporter) - 2009-05-01 09:19
 http://bugs.digium.com/view.php?id=15010#c104019 
---------------------------------------------------------------------- 
Okay, I got a bit further by disabling CID and now it actually runs through
the dialplan :-

== Starting post polarity CID detection on channel 1
    -- Starting simple switch on 'DAHDI/1-1'
    -- Executing [s at inbound-dahdi:1] Answer("DAHDI/1-1", "") in new stack
    -- Executing [s at inbound-dahdi:2] Ringing("DAHDI/1-1", "") in new
stack
    -- Executing [s at inbound-dahdi:3] Wait("DAHDI/1-1", "1") in new stack
    -- Executing [s at inbound-dahdi:4] Playback("DAHDI/1-1", "home-message")
in new stack
    -- <DAHDI/1-1> Playing 'home-message.gsm' (language 'en')
    -- Executing [s at inbound-dahdi:5] Hangup("DAHDI/1-1", "") in new stack
  == Spawn extension (inbound-dahdi, s, 5) exited non-zero on 'DAHDI/1-1'
    -- Hungup 'DAHDI/1-1'

The problem is that DAHDI does not actually pick up the inbound PSTN call
and bridge to play the message.  On the dialling phone it just rings and
rings and the above loops until the physical call is hungup :( 

Issue History 
Date Modified    Username       Field                    Change               
====================================================================== 
2009-05-01 09:19 uxbod          Note Added: 0104019                          
======================================================================