[asterisk-bugs] [DAHDI-linux 0013897]: [patch] Support for generic HFC-4S cards

[Asterisk Bug Tracker]

A NOTE has been added to this issue. 
====================================================================== 
http://bugs.digium.com/view.php?id=13897 
====================================================================== 
Reported By:                tzafrir
Assigned To:                tzafrir
====================================================================== 
Project:                    DAHDI-linux
Issue ID:                   13897
Category:                   wcb4xxp
Reproducibility:            N/A
Severity:                   feature
Priority:                   normal
Status:                     confirmed
====================================================================== 
Date Submitted:             2008-11-13 16:17 CST
Last Modified:              2009-03-12 08:35 CDT
====================================================================== 
Summary:                    [patch] Support for generic HFC-4S cards
Description: 
A patch to add some basic support of other HFC-4S -based PCI cards (such as
the ones made by Junghanns). 

Status: gets rid of the echo canceller messages when not needed, but still
needs work.

Specifically:
* It adds too broad a range of cards (which also include bero.net cards) 
* The range may include some 2-ports cards, which will probably not work.

Not yet tested to work, though it it is at least configured.

====================================================================== 

---------------------------------------------------------------------- 
 (0101639) lanzaandrea (reporter) - 2009-03-12 08:35
 http://bugs.digium.com/view.php?id=13897#c101639 
---------------------------------------------------------------------- 
I am not beying succesful on my test: I always get:

 -- Executing ...Dial("SIP/456-b7b9ede0", "DAHDI/g2/34813xxxx4,30,t") in
new stack
  == Everyone is busy/congested at this time (1:0/0/1)

(I scrambled part of the number I am trying to call)
I am using g2 because meanwhile I connected a second line to my board, so
now I have:
*CLI> dahdi show status
Description                              Alarms  IRQ    bpviol CRC4   Fra
Codi Options  LBO
B4XXP (PCI) Card 0 Span 1                OK      0      0      0      CCS
AMI  YEL      0 db (CSU)/0-133 feet (DSX-1)
B4XXP (PCI) Card 0 Span 2                OK      0      0      0      CCS
AMI  YEL      0 db (CSU)/0-133 feet (DSX-1) 

Issue History 
Date Modified    Username       Field                    Change               
====================================================================== 
2009-03-12 08:35 lanzaandrea    Note Added: 0101639                          
======================================================================