[asterisk-bugs] [DAHDI-linux 0013897]: [patch] Support for generic HFC-4S cards

[Asterisk Bug Tracker]

A NOTE has been added to this issue. 
====================================================================== 
http://bugs.digium.com/view.php?id=13897 
====================================================================== 
Reported By:                tzafrir
Assigned To:                tzafrir
====================================================================== 
Project:                    DAHDI-linux
Issue ID:                   13897
Category:                   wcb4xxp
Reproducibility:            N/A
Severity:                   feature
Priority:                   normal
Status:                     confirmed
====================================================================== 
Date Submitted:             2008-11-13 16:17 CST
Last Modified:              2009-03-12 07:43 CDT
====================================================================== 
Summary:                    [patch] Support for generic HFC-4S cards
Description: 
A patch to add some basic support of other HFC-4S -based PCI cards (such as
the ones made by Junghanns). 

Status: gets rid of the echo canceller messages when not needed, but still
needs work.

Specifically:
* It adds too broad a range of cards (which also include bero.net cards) 
* The range may include some 2-ports cards, which will probably not work.

Not yet tested to work, though it it is at least configured.

====================================================================== 

---------------------------------------------------------------------- 
 (0101633) lanzaandrea (reporter) - 2009-03-12 07:43
 http://bugs.digium.com/view.php?id=13897#c101633 
---------------------------------------------------------------------- 
Yes, I had dahdi_dummy loaded before
now, from asterisk, I can see this:

CLI> dahdi show status
Description                              Alarms  IRQ    bpviol CRC4   Fra
Codi Options  LBO
B4XXP (PCI) Card 0 Span 1                OK      0      0      0      CCS
AMI  YEL      0 db (CSU)/0-133 feet (DSX-1)
B4XXP (PCI) Card 0 Span 2                RED     0      0      0      CCS
AMI  YEL      0 db (CSU)/0-133 feet (DSX-1)

I connected only 1 line to by board.
also dahdi_tool reports span 1 is ok

now I will search how to place a call on a dahdi trunk: I belive something
like
DAHDI/g1/$OUTNUM, but I will search the doc...

Now I will search 

Issue History 
Date Modified    Username       Field                    Change               
====================================================================== 
2009-03-12 07:43 lanzaandrea    Note Added: 0101633                          
======================================================================