[asterisk-bugs] [Asterisk 0014555]: When i park a call after the slot announcement the call is not hangup

[Asterisk Bug Tracker]

A NOTE has been added to this issue. 
====================================================================== 
http://bugs.digium.com/view.php?id=14555 
====================================================================== 
Reported By:                francesco_r
Assigned To:                jpeeler
====================================================================== 
Project:                    Asterisk
Issue ID:                   14555
Category:                   Resources/res_features
Reproducibility:            always
Severity:                   minor
Priority:                   normal
Status:                     assigned
Asterisk Version:           SVN 
Regression:                 No 
SVN Branch (only for SVN checkouts, not tarball releases):  1.4  
SVN Revision (number only!): 178266 
Request Review:              
====================================================================== 
Date Submitted:             2009-02-25 11:38 CST
Last Modified:              2009-03-10 11:47 CDT
====================================================================== 
Summary:                    When i park a call after the slot announcement the
call is not hangup
Description: 
In asterisk 1.4.22 and all previous versions, when i parked a call using
the one-touch park feature or the direct transfer to parking (ex
http://bugs.digium.com/view.php?id=70), the
call was immediately hangup. Using the latest code of 1.4 the call is not
hangup.
For example i use this extensions.conf (is from freepbx):

[from-internal]
include => parkedcalls
include => from-internal-additional
include => bad-number

[from-internal-additional]
include => park-hints
exten => _9X.,1,Dial(misdn/1/${EXTEN:1},300,TK)
exten => _9X.,n,Dial(misdn/2/${EXTEN:1},300,TK)
exten => _9X.,n,Macro(outisbusy,)
exten => h,1,Hangup

[macro-outisbusy]
exten => s,1,Playback(all-circuits-busy-now,noanswer)
exten => s,n,Playback(pls-try-call-later,noanswer)
exten => s,n,Macro(hangupcall)

[macro-hangupcall]
exten => s,1,ResetCDR(w)
exten => s,n,NoCDR()
exten => s,n,Hangup

[bad-number]
include => bad-number-custom
exten => _X.,1,ResetCDR()
exten => _X.,n,NoCDR()
exten => _X.,n,Wait(1)
exten =>
_X.,n,Playback(silence/1&cannot-complete-as-dialed&check-number-dial-again,noanswer)
exten => _X.,n,Wait(1)
exten => _X.,n,Congestion(20)
exten => _X.,n,Hangup


If i dial an external number and i park the call using the one-touch
feature, the person that park hear all-circuits-busy-now (macro outisbusy).
When i pickup and i repark the call instead hear cannot-complete-as-dialed
(macro bad-number).

Can the previous behaviour can be restored?
====================================================================== 

---------------------------------------------------------------------- 
 (0101477) francesco_r (reporter) - 2009-03-10 11:47
 http://bugs.digium.com/view.php?id=14555#c101477 
---------------------------------------------------------------------- 
Any news on this?
I discovered another problem using the built-in Attended Transfer feature:
when the called party that start the transfer hangup, the two calls are not
bridged but both calls are hangup. This problem was not present in previous
version. Using the sip attended transfer instead works well. Is the same
problem or i must open another ticket?
Thank you 

Issue History 
Date Modified    Username       Field                    Change               
====================================================================== 
2009-03-10 11:47 francesco_r    Note Added: 0101477                          
======================================================================