[asterisk-bugs] [Asterisk 0014383]: priexclusive parameter ignored if pri = pri_cpe ?
Asterisk Bug Tracker
noreply at bugs.digium.com
Fri Jun 26 20:14:19 CDT 2009
A NOTE has been added to this issue.
======================================================================
https://issues.asterisk.org/view.php?id=14383
======================================================================
Reported By: mbrancaleoni
Assigned To: rmudgett
======================================================================
Project: Asterisk
Issue ID: 14383
Category: Channels/chan_dahdi
Reproducibility: always
Severity: minor
Priority: normal
Status: closed
Asterisk Version: 1.4.23
Regression: No
SVN Branch (only for SVN checkouts, not tarball releases): N/A
SVN Revision (number only!):
Request Review:
Resolution: fixed
Fixed in Version:
======================================================================
Date Submitted: 2009-02-02 04:16 CST
Last Modified: 2009-06-26 20:14 CDT
======================================================================
Summary: priexclusive parameter ignored if pri = pri_cpe ?
Description:
Hi,
there's a special reason why the priexclusive param is used only if the
pri is pri_net ?
Looking to this snippet of code (both in chan_zap and chan_dahdi):
**************************
/* Add support for exclusive override */
if (p->priexclusive)
exclusive = 1;
else {
/* otherwise, traditional behavior */
if (p->pri->nodetype == PRI_NETWORK)
exclusive = 0;
else
exclusive = 1;
}
**************************
Seems that the exclusive is always true if the pri is PRI_CPE ?
There's a special reason for that?
Many telcos requires that the channel selection on CPE side must NOT be
exclusive...
I don't know if there's some drawback into setting exclusive = 0 even when
PRI_CPE is selected.
======================================================================
----------------------------------------------------------------------
(0107089) svnbot (reporter) - 2009-06-26 20:14
https://issues.asterisk.org/view.php?id=14383#c107089
----------------------------------------------------------------------
Repository: asterisk
Revision: 203910
_U branches/1.6.0/
U branches/1.6.0/channels/chan_dahdi.c
------------------------------------------------------------------------
r203910 | rmudgett | 2009-06-26 20:14:18 -0500 (Fri, 26 Jun 2009) | 30
lines
Merged revisions 203909 via svnmerge from
https://origsvn.digium.com/svn/asterisk/trunk
................
r203909 | rmudgett | 2009-06-26 20:07:52 -0500 (Fri, 26 Jun 2009) | 23
lines
Merged revisions 203908 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r203908 | rmudgett | 2009-06-26 19:55:12 -0500 (Fri, 26 Jun 2009) | 16
lines
The ISDN CPE side should not exclusively pick B channels normally.
Before this patch, Asterisk unconditionally picked B channels
exclusively
on the CPE side and normally allowed alternative B channels on the
network
side. Now Asterisk does the opposite.
Reasons for the CPE side to normally not pick B channels exclusively:
* For CPE point-to-multipoint mode (i.e. phone side), the CPE side
does
not have enough information to exclusively pick B channels. (There
may be
other devices on the line.)
* Q.931 gives preference to the network side picking B channels.
* Some telcos require the CPE side to not pick B channels
exclusively.
(closes issue https://issues.asterisk.org/view.php?id=14383)
Reported by: mbrancaleoni
........
................
------------------------------------------------------------------------
http://svn.digium.com/view/asterisk?view=rev&revision=203910
Issue History
Date Modified Username Field Change
======================================================================
2009-06-26 20:14 svnbot Checkin
2009-06-26 20:14 svnbot Note Added: 0107089
======================================================================
More information about the asterisk-bugs
mailing list