[asterisk-bugs] [Asterisk 0014807]: SendFax and T38 issues

Asterisk Bug Tracker noreply at bugs.digium.com
Tue Jun 9 09:30:07 CDT 2009


A NOTE has been added to this issue. 
====================================================================== 
https://issues.asterisk.org/view.php?id=14807 
====================================================================== 
Reported By:                moliveras
Assigned To:                
====================================================================== 
Project:                    Asterisk
Issue ID:                   14807
Category:                   Channels/chan_sip/T.38
Reproducibility:            always
Severity:                   minor
Priority:                   normal
Status:                     feedback
Asterisk Version:           1.6.2.0-beta1 
Regression:                 No 
SVN Branch (only for SVN checkouts, not tarball releases): N/A 
SVN Revision (number only!):  
Request Review:              
====================================================================== 
Date Submitted:             2009-04-01 16:06 CDT
Last Modified:              2009-06-09 09:30 CDT
====================================================================== 
Summary:                    SendFax and T38 issues
Description: 
I am trying to get SendFax to work using a call file.

I initially tried it with asterisk-1.6.0.3 (spandsp-0.0.5pre4).

When I sent a call to a local spa2102 TA, the far end sent a re-invite to
switch over to T38, and the call went through as T38.

asterisk1.6.0.3 --> SBC --> ast1.4 --> spa2102

When I sent the call out to a land line via a carrier (SIP trunk),
asterisk receives the T38 reinvite, however the 200 OK that it sends back
only has g711 as a codec choice, and not udptl t38.  As a result, the fax
failes.

asterisk1.6.0.3 --> SBC --> SIP trunk

I then tried upgrading to asterisk-1.6.2.0-beta1 (spandsp-0.0.6pre7).
Now when I make the call to the land line over the SIP trunk the behavior
is the same, however when I call the spa2102 line, ast1.6.2.0-beta1 rejects
the SIP reinvite with a 488, and the fax completes inband.

Also, the 1.6.2.0-beta1 spits out these errors while the fax in in
progress:

[Apr  1 13:53:41] ERROR[10228]: channel.c:2539 __ast_read: ast_read()
called with no recorded file descriptor.

I will attach packet captures for these scenarios momentarily.  I can
reproduce this behavior consistently and can provide whatever info/debug is
needed.


====================================================================== 

---------------------------------------------------------------------- 
 (0106161) moliveras (reporter) - 2009-06-09 09:30
 https://issues.asterisk.org/view.php?id=14807#c106161 
---------------------------------------------------------------------- 
I am attaching 3 sip logs where a fax was sent using SendFax from asterisk
1.6.0.10.  If I send the fax through SIP carrierA, asterisk does not
include t38 in the 200 OK to the sip reInvite, and the fax fails.  If I
send the fax to a local spa2102 device, or to SIP CarrierB, then the 200 OK
to the t38 reInvite does include t38 and the fax succeeds.  I assume that
asterisk does not like something in the t38 reinvite from CarrierA. 

Issue History 
Date Modified    Username       Field                    Change               
====================================================================== 
2009-06-09 09:30 moliveras      Note Added: 0106161                          
======================================================================




More information about the asterisk-bugs mailing list