No subject

The automatic overnight line tests (or manual ones) used on UK (BT) lines
causes
a red alarm on a dahdi / TDM400P connected channel. This is because the
line
uses voltage tests (battery loss) and polarity reversal. The polarity
reversal
causes chan_dahdi to initiate v23 CallerID processing but during this the
event
DAHDI_EVENT_NOALARM is ignored so that the alarm is never cleared.

(closes issue https://issues.asterisk.org/view.php?id=14163)
Reported by: jedi98
Patches: 
      chan_dahdi-1.4-inalarm.diff uploaded by jedi98 (license 653)
Tested by: mattbrown, Chainsaw, mikeeccleston

------------------------------------------------------------------------

http://svn.digium.com/view/asterisk?view=rev&revision=250480 

Issue History 
Date Modified    Username       Field                    Change               
====================================================================== 
2010-03-03 13:04 svnbot         Checkin                                      
2010-03-03 13:04 svnbot         Note Added: 0118884                          
======================================================================