No subject

POTS -> Digium TDM FXO module - Asterisk - Digium FXS module -> Analog
phone.

1).If the analog phone is left unanswered and the POTS party hangs up,
about 50% of the time the FXO channel fails to hangup via Busydetect or
runs on well over "busycount" value before hanging up.

2).If the FXS analog phone answers the call and it is left off hook, a
hangup at the POTS end will successfully hangup the FXO channel via
busydetect 100% of the time.
"

My country (Taiwan) does not have polarity reversal so I must rely on
busydetect.  Everything works beautifully if the ZAP caller hangs up while
in an IVR menu or is bridged to an answered SIP/IAX channel.  If the ZAP
caller hangs up while the SIP/IAX channel its attempting to bridge to is
not answered, busy detect does not work.  The IAX/SIP channel will keep
ringing indefinitely.  

I've also installed patch from 0009096 for DTMF detection.
====================================================================== 

---------------------------------------------------------------------- 
 (0110944) lmadsen (administrator) - 2009-09-18 08:27
 https://issues.asterisk.org/view.php?id=15306#c110944 
---------------------------------------------------------------------- 
Closed per the reporter. Thanks! 

Issue History 
Date Modified    Username       Field                    Change               
====================================================================== 
2009-09-18 08:27 lmadsen        Note Added: 0110944                          
2009-09-18 08:27 lmadsen        Status                   new => closed       
======================================================================