[asterisk-bugs] [DAHDI-tools 0015553]: [patch] Dahdi_scan gives you wrong information about signaling when specify the span number

[Asterisk Bug Tracker]

The following issue has been UPDATED. 
====================================================================== 
https://issues.asterisk.org/view.php?id=15553 
====================================================================== 
Reported By:                tony
Assigned To:                
====================================================================== 
Project:                    DAHDI-tools
Issue ID:                   15553
Category:                   Utilities
Reproducibility:            always
Severity:                   major
Priority:                   normal
Status:                     new
====================================================================== 
Date Submitted:             2009-07-22 05:30 CDT
Last Modified:              2009-07-23 06:48 CDT
====================================================================== 
Summary:                    [patch] Dahdi_scan gives you wrong information about
signaling when specify the span number
Description: 
when i try to specify the span number, and fetch the channels information,
it returns wrong data.

example: 
dahdi_scan [ without span number specify] :

[1]
active=yes
alarms=OK
description=Wildcard TDM400P REV E/F Board 5
name=WCTDM/4
manufacturer=Digium
devicetype=Wildcard TDM400P REV E/F
location=PCI Bus 01 Slot 08
basechan=1
totchans=4
irq=17
type=analog
port=1,FXO
port=2,FXO
port=3,FXO
port=4,FXO

[2]
active=yes
alarms=OK
description=Wildcard TDM400P REV E/F Board 5
name=WCTDM/4
manufacturer=Digium
devicetype=Wildcard TDM400P REV E/F
location=PCI Bus 08 Slot 01
basechan=5
totchans=4
irq=16
type=analog
port=5,FXS
port=6,FXO
port=7,none
port=8,none

dahdi_scan 1 [for spam 1]: 
[1]
active=yes
alarms=OK
description=Wildcard TDM400P REV E/F Board 5
name=WCTDM/4
manufacturer=Digium
devicetype=Wildcard TDM400P REV E/F
location=PCI Bus 01 Slot 08
basechan=1
totchans=4
irq=17
type=analog
port=1,FXO
port=2,FXO
port=3,FXO
port=4,FXO

dahdi_scan 2 [for spam 2]: 
[2]
active=yes
alarms=OK
description=Wildcard TDM400P REV E/F Board 5
name=WCTDM/4
manufacturer=Digium
devicetype=Wildcard TDM400P REV E/F
location=PCI Bus 08 Slot 01
basechan=1
totchans=4
irq=16
type=analog
port=1,FXO
port=2,FXO
port=3,FXO
port=4,FXO

The problem is that the port signaling is equal in both spans.


====================================================================== 

Issue History 
Date Modified    Username       Field                    Change               
====================================================================== 
2009-07-23 06:48 tony           Summary                  Dahdi_scan gives you
wrong information about signaling when specify the span number => [patch]
Dahdi_scan gives you wrong information about signaling when specify the span
number
======================================================================