[asterisk-bugs] [Asterisk 0015452]: Unable to make ISDN PRI calls after upgrade.

[Asterisk Bug Tracker]

A NOTE has been added to this issue. 
====================================================================== 
https://issues.asterisk.org/view.php?id=15452 
====================================================================== 
Reported By:                alecdavis
Assigned To:                
====================================================================== 
Project:                    Asterisk
Issue ID:                   15452
Category:                   Channels/chan_dahdi
Reproducibility:            always
Severity:                   major
Priority:                   normal
Status:                     new
Asterisk Version:           SVN 
Regression:                 No 
SVN Branch (only for SVN checkouts, not tarball releases): N/A 
SVN Revision (number only!): 203077 
Request Review:              
====================================================================== 
Date Submitted:             2009-07-05 21:50 CDT
Last Modified:              2009-07-07 17:22 CDT
====================================================================== 
Summary:                    Unable to make ISDN PRI calls after upgrade.
Description: 
After upgrade to SVN-trunk-r204919M from SVN-branch-1.6.2-r203077M we are
unable to make ISDN PRI calls.

reverting back to 1.6.2-r203077M with exactly same configs, works again.

Console output as attached files.

The difference is the extra "Ext: 1  DS1 Identifier: 0" that's not present
using older code.

====================================================================== 

---------------------------------------------------------------------- 
 (0107464) alecdavis (reporter) - 2009-07-07 17:22
 https://issues.asterisk.org/view.php?id=15452#c107464 
---------------------------------------------------------------------- 
libpri version: SVN-branch-1.4-r865
Asterisk SVN-trunk-r205014
DAHDI Version: 2.2.0 Echo Canceller: MG2

Connecting to a Jtec QSIG card the call fails as reported.

If we connect to a JTec E1MN ETSI card, the call will succeed. Still has
an error come back.

uploaded Invalid-information-element-contects-100.txt
This is a successful call, using a non-qsig trunk, still there is a STATUS
message indicating not happy. 

Issue History 
Date Modified    Username       Field                    Change               
====================================================================== 
2009-07-07 17:22 alecdavis      Note Added: 0107464                          
======================================================================