[asterisk-bugs] [Asterisk 0014031]: [patch] "pri_find_dchan: No D-channels available!" error on console when using wcb4xxp

[Asterisk Bug Tracker]

A NOTE has been added to this issue. 
====================================================================== 
http://bugs.digium.com/view.php?id=14031 
====================================================================== 
Reported By:                sruffell
Assigned To:                sruffell
====================================================================== 
Project:                    Asterisk
Issue ID:                   14031
Category:                   Channels/chan_dahdi
Reproducibility:            always
Severity:                   major
Priority:                   normal
Status:                     confirmed
Asterisk Version:           SVN 
Regression:                 No 
SVN Branch (only for SVN checkouts, not tarball releases):  trunk 
SVN Revision (number only!): 160386 
Request Review:              
====================================================================== 
Date Submitted:             2008-12-08 14:55 CST
Last Modified:              2009-01-15 13:45 CST
====================================================================== 
Summary:                    [patch] "pri_find_dchan: No D-channels available!"
error on console when using wcb4xxp
Description: 
When a wcb4xxp is connected as a BRI span in TE mode, you get errors like:

[Dec 2 22:02:48] WARNING[4759]: chan_dahdi.c:3008 pri_find_dchan: No
D-channels available! Using Primary channel 6 as D-channel anyway!
[Dec 2 22:02:49] WARNING[4758]: chan_dahdi.c:3008 pri_find_dchan: No
D-channels available! Using Primary channel 3 as D-channel anyway!
[Dec 2 22:03:19] WARNING[4759]: chan_dahdi.c:3008 pri_find_dchan: No
D-channels available! Using Primary channel 6 as D-channel anyway!

On your asterisk console and in your asterisk log. 
====================================================================== 

---------------------------------------------------------------------- 
 (0097959) sruffell (administrator) - 2009-01-15 13:45
 http://bugs.digium.com/view.php?id=14031#c97959 
---------------------------------------------------------------------- 
Thanks for testing this.  But just for my own education, what happens if
you do not use the teignorered parameter?  Is it that you're board goes
into red alarm repeatedly when connected to your telco, or if you unplug a
cable and reconnect it, it never comes out of the alarm state? 

Issue History 
Date Modified    Username       Field                    Change               
====================================================================== 
2009-01-15 13:45 sruffell       Note Added: 0097959                          
======================================================================