[asterisk-bugs] [DAHDI-linux 0014104]: [patch] Generate VMWI line reversal from FXS module to light LED on newer 'non intellegent phone'

[Asterisk Bug Tracker]

A NOTE has been added to this issue. 
====================================================================== 
http://bugs.digium.com/view.php?id=14104 
====================================================================== 
Reported By:                alecdavis
Assigned To:                dbailey
====================================================================== 
Project:                    DAHDI-linux
Issue ID:                   14104
Category:                   wctdm
Reproducibility:            always
Severity:                   feature
Priority:                   normal
Status:                     assigned
====================================================================== 
Date Submitted:             2008-12-18 02:36 CST
Last Modified:              2009-01-09 05:07 CST
====================================================================== 
Summary:                    [patch] Generate VMWI line reversal from FXS module
to light LED on newer 'non intellegent phone'
Description: 
Added initial fundamental support to manipulate FXS line to generate
Message Waiting Indication. Still supports sending FSK as has been
supported for years.

Discovered undocumented parameter 'mwisendtype' in chan_dahdi.conf which
can only be 'rpas' Ring Pulse Alert Signal at the moment.

Intention is to use this field with parameters as follows;
   'fsk' or undefined for exisiting FSK only support.
   'none' no FSK spill heard every second time you go off hook.
   'rpas' for existing support ring pulse before FSK
   'lrev' line reversed while messages exist
   'hvdc' high voltage, 90Vdc idle voltage
   'hvac' high voltage neon generation, Following Silicb AN33

Alec


====================================================================== 

---------------------------------------------------------------------- 
 (0097264) alecdavis (reporter) - 2009-01-09 05:07
 http://bugs.digium.com/view.php?id=14104#c97264 
---------------------------------------------------------------------- 
uploaded wctdm.mwisendtype.diff3.txt
uploaded fxstest.diff.txt

DAHDI_SETPOLARITY ioctl now is a channel variable.
module parameter 'reversepolarity' still supported.
VMWI ioctl changed to set line state.

fxstest: added support VMWI message testing, and minor change to allow
setting polarity immediately after wctdm is loaded, otherwise a ring test
was required first. 

Issue History 
Date Modified    Username       Field                    Change               
====================================================================== 
2009-01-09 05:07 alecdavis      Note Added: 0097264                          
======================================================================