[asterisk-bugs] [Asterisk 0013892]: After upgrading from 1.4.21.2 to 1.4.22 unaswered calls aren't correctly saved as CDR

[Asterisk Bug Tracker]

A NOTE has been added to this issue. 
====================================================================== 
http://bugs.digium.com/view.php?id=13892 
====================================================================== 
Reported By:                dzajro
Assigned To:                murf
====================================================================== 
Project:                    Asterisk
Issue ID:                   13892
Category:                   CDR/General
Reproducibility:            always
Severity:                   major
Priority:                   normal
Status:                     ready for testing
Asterisk Version:           1.4.22 
Regression:                 No 
SVN Branch (only for SVN checkouts, not tarball releases): N/A 
SVN Revision (number only!):  
Request Review:              
====================================================================== 
Date Submitted:             2008-11-12 17:11 CST
Last Modified:              2009-02-23 10:37 CST
====================================================================== 
Summary:                    After upgrading from 1.4.21.2 to 1.4.22 unaswered
calls aren't correctly saved as CDR
Description: 
Call from SIP extension into PSTN via Zap to non-existing number. PSTN is
correctly returning unassigne/unallocated number.

    -- Executing [s at macro-to-pstn-4:3] Dial("SIP/421232660232-0a2d22d8",
"Zap/g4/421230123123") in new stack
    -- Requested transfer capability: 0x00 - SPEECH
    -- Called g4/421230123123
    -- Zap/1-1 is proceeding passing it to SIP/421232660232-0a2d22d8
    -- Channel 0/1, span 1 got hangup request, cause 1
    -- Hungup 'Zap/1-1'
  == Everyone is busy/congested at this time (1:0/0/1)

With 1.4.21.2 and "unanswered = no" in cdr.conf * produces following CDR:

src=421232660232
dst=421230123123
channel=SIP/421232660232-xxx
dstchannel=Zap/1-1
duration=0
billsec=0
disposition=NO ANSWER

1.4.21.2 with "unanswered = yes" produces the same PLUS (the are 2 CDR for
the same call, with the same call_date):

src=421232660232
dst=s
channel=Zap/1-1
dstchannel=
duration=0
billsec=0
disposition=NO ANSWER

With 1.4.22 and "unanswered = no" system produces NO CDR

With 1.4.22 and "unanswered = yes" system produces only ONE CDR:
src=
dst=s
channel=Zap/1-1
dstchannel=
duration=0
billsec=0
disposition=NO ANSWER

This CDR is unusable for billing/documentary purpose, there's NO SRC, no
real channel.
======================================================================
Relationships       ID      Summary
----------------------------------------------------------------------
related to          0011849 Missing CDR's for Transfers
related to          0013691 [patch] Unanswered Queue() calls don't ...
related to          0012946 ResetCDR not work now on non-answered c...
====================================================================== 

---------------------------------------------------------------------- 
 (0100558) murf (administrator) - 2009-02-23 10:37
 http://bugs.digium.com/view.php?id=13892#c100558 
---------------------------------------------------------------------- 
compiled... and installed, also, correct?

Then, in asterisk,  you most likely need to do a make distclean,
./configure (--enable-dev-mode if you want); make menuselect;  make; make
install 

I find that old files seem to get in the way in asterisk, when you have
compile probs like this, it is often beneficial to clean it completely out
and start over. 

Issue History 
Date Modified    Username       Field                    Change               
====================================================================== 
2009-02-23 10:37 murf           Note Added: 0100558                          
======================================================================