[asterisk-bugs] [LibPRI 0012816]: Nortel to Asterisk (card Sangoma A101) by qsig no pass caller name

[Asterisk Bug Tracker]

A NOTE has been added to this issue. 
====================================================================== 
http://bugs.digium.com/view.php?id=12816 
====================================================================== 
Reported By:                silverx
Assigned To:                mattf
====================================================================== 
Project:                    LibPRI
Issue ID:                   12816
Category:                   General
Reproducibility:            always
Severity:                   minor
Priority:                   normal
Status:                     acknowledged
Asterisk Version:           1.4.20.1 
SVN Branch (only for SVN checkouts, not tarball releases): N/A 
SVN Revision (number only!):  
Disclaimer on File?:        N/A 
Request Review:              
====================================================================== 
Date Submitted:             2008-06-09 08:10 CDT
Last Modified:              2009-02-23 08:57 CST
====================================================================== 
Summary:                    Nortel to Asterisk (card Sangoma A101) by qsig no
pass caller name
Description: 
Hi 
I've an Asterisk 1.4.20.1 server with asterisk-addons-1.4.7, libpri-1.4.4,
zaptel-1.4.11 and wanpipe-3.2.5.
I've a connection: PBX Nortel By Qsig (sangoma) to Asterisk and
another connection: PBX Nortel by Qsig to Cisco call manager

The issue is: when I use a cisco phone to cal asterisk through channel
nortel --> Asterisk I can see the caller name (cisco routed to nortel).
Using nortel phone to Asterisk the caller name is missing (strange !!) 
In the log I recieve this message 

[Jun  9 14:27:15] VERBOSE[6246] logger.c: < Facility (len=40, codeset=0) [
[Jun  9 14:27:15] VERBOSE[6246] logger.c: 0x9F, 0xAA, 0x06, 0x80, 0x01,
0x00, 0x82, 0x01, 0x00, 0x8B, 0x01, 0x00, 0xA1, 0x18, 0x02, 0x02, 0x01,
0x00, 0x06, 0x04, '+', 0x0C, 0x09, 0x00, 0x80, 0x0C, 'Luca Boriani'[Jun  9
14:27:15] VERBOSE[6246] logger.c:  ]
[Jun  9 14:27:15] VERBOSE[6246] logger.c: !! Unable to handle ROSE
operation 722209024[Jun  9 14:27:15] VERBOSE[6246] logger.c:  [ 80 0C 4C 75
63 61 20 42 6F 72 69 61 6E 69 ] - [..Luca Boriani]

can you help me please?
Thanks




====================================================================== 

---------------------------------------------------------------------- 
 (0100541) CodyStewart (reporter) - 2009-02-23 08:57
 http://bugs.digium.com/view.php?id=12816#c100541 
---------------------------------------------------------------------- 
I had this same problem. It was resolved with the combination of the
"facilityenable=yes" in zapata.conf, and setting the Meridian PBX for RCAP
= NDI with IFC = ISGF. This resulted in the CID names being sent and
received correctly. This was with the Asterisk side of the span set for
PRI-CPE signalling. 

Issue History 
Date Modified    Username       Field                    Change               
====================================================================== 
2009-02-23 08:57 CodyStewart    Note Added: 0100541                          
======================================================================