[asterisk-bugs] [Asterisk 0015456]: MixMonitor stop call bridging

[Asterisk Bug Tracker]

The following issue requires your FEEDBACK. 
====================================================================== 
https://issues.asterisk.org/view.php?id=15456 
====================================================================== 
Reported By:                robboardman
Assigned To:                
====================================================================== 
Project:                    Asterisk
Issue ID:                   15456
Category:                   Applications/app_mixmonitor
Reproducibility:            always
Severity:                   minor
Priority:                   normal
Status:                     feedback
Asterisk Version:           SVN 
Regression:                 No 
SVN Branch (only for SVN checkouts, not tarball releases): N/A 
SVN Revision (number only!):  
Request Review:              
====================================================================== 
Date Submitted:             2009-07-06 17:50 CDT
Last Modified:              2009-08-31 09:06 CDT
====================================================================== 
Summary:                    MixMonitor stop call bridging
Description: 
When using MixMonitor with B410p and Dahdi, I have set it up so that a call
is routed though an NT port in and out, if a call is bridged with
mixmonitor running the call is answered but the handset(HS2) that answeres
has ringing played back and the dialing handset has  silence (HS1)

HS1->PBX->(NT [span3]) asterisk (NT [span3])-> PBX -> HS2
where the PBX are the same machineand the call is using the same span for
both legs of the call.

if you can see CUQ-147930
====================================================================== 

---------------------------------------------------------------------- 
 (0109844) lmadsen (administrator) - 2009-08-31 09:06
 https://issues.asterisk.org/view.php?id=15456#c109844 
---------------------------------------------------------------------- 
Can you please provide your configuration information, the type of PBX, the
signalling methods, etc... that are being used here? Additionally, any
configuration information which is relevant here in order for someone to be
able to attempt to reproduce this in the lab. Thanks! 

Issue History 
Date Modified    Username       Field                    Change               
====================================================================== 
2009-08-31 09:06 lmadsen        Note Added: 0109844                          
2009-08-31 09:06 lmadsen        Status                   new => feedback     
======================================================================