[asterisk-bugs] [Asterisk-GUI 0015590]: Apparently the DAHDI configuration creates double entries in dahdi-channels.conf
Asterisk Bug Tracker
noreply at bugs.digium.com
Wed Aug 5 08:36:53 CDT 2009
A NOTE has been added to this issue.
======================================================================
https://issues.asterisk.org/view.php?id=15590
======================================================================
Reported By: timeshell
Assigned To: awk
======================================================================
Project: Asterisk-GUI
Issue ID: 15590
Category: General
Reproducibility: always
Severity: minor
Priority: normal
Status: assigned
Asterisk GUI Version: SVN
Asterisk Version: 1.6.0.9
SVN Branch (only for SVN checkouts, not tarball releases): N/A
SVN Revision (number only!): 4970
Disclaimer on File?: N/A
Request Review:
======================================================================
Date Submitted: 2009-07-27 16:20 CDT
Last Modified: 2009-08-05 08:36 CDT
======================================================================
Summary: Apparently the DAHDI configuration creates double
entries in dahdi-channels.conf
Description:
callerid =
The above is apparently entered twice in each channel context in
dahdi-channels.conf.
======================================================================
----------------------------------------------------------------------
(0108646) phsultan (manager) - 2009-08-05 08:36
https://issues.asterisk.org/view.php?id=15590#c108646
----------------------------------------------------------------------
On my system, dahdi_genconf generates the following dahdi-channels.conf :
; Span 1: WCT1/0 "Wildcard TE120P Card 0" (MASTER) HDB3/CCS/CRC4
ClockSource
group=0,11
context=from-pstn
switchtype = euroisdn
signalling = pri_cpe
channel => 1-15,17-31
context = default
group = 63
I can't figure out why the 'default' context and the group 63 are set.
The actual group value used by Asterisk is unknown :
voiceserver*CLI> dahdi show channels group 0
Chan Extension Context Language MOH Interpret Blocked
State
voiceserver*CLI> dahdi show channels group 11
Chan Extension Context Language MOH Interpret Blocked
State
voiceserver*CLI> dahdi show channels group 63
Chan Extension Context Language MOH Interpret Blocked
State
voiceserver*CLI>
It looks like group 0 and context from-pstn are taken into account by
Asterisk :
exten => _XXXXXXXXXX,1,Dial/g0/${EXTEN} >>>> works OK
And :
voiceserver*CLI> dahdi show channels
Chan Extension Context Language MOH Interpret Blocked
State
pseudo default default
In Service
1 from-pstn default
In Service
2 from-pstn default
In Service
3 from-pstn default
In Service
4 from-pstn default
In Service
5 from-pstn default
In Service
6 from-pstn default
In Service
7 from-pstn default
In Service
8 from-pstn default
In Service
9 from-pstn default
In Service
10 from-pstn default
In Service
11 from-pstn default
In Service
12 from-pstn default
In Service
13 from-pstn default
In Service
14 from-pstn default
In Service
15 from-pstn default
In Service
17 from-pstn default
In Service
18 from-pstn default
In Service
19 from-pstn default
In Service
20 from-pstn default
In Service
21 from-pstn default
In Service
22 from-pstn default
In Service
23 from-pstn default
In Service
24 from-pstn default
In Service
25 from-pstn default
In Service
26 from-pstn default
In Service
27 from-pstn default
In Service
28 from-pstn default
In Service
29 from-pstn default
In Service
30 from-pstn default
In Service
31 from-pstn default
In Service
voiceserver*CLI>
Issue History
Date Modified Username Field Change
======================================================================
2009-08-05 08:36 phsultan Note Added: 0108646
======================================================================
More information about the asterisk-bugs
mailing list