[asterisk-bugs] [Zaptel 0013508]: TE412P as PointoPoint data link over 4E1 for 4x2=8Mb

[Asterisk Bug Tracker]

The following issue has been UPDATED. 
====================================================================== 
http://bugs.digium.com/view.php?id=13508 
====================================================================== 
Reported By:                tusar
Assigned To:                russell
====================================================================== 
Project:                    Zaptel
Issue ID:                   13508
Category:                   General
Reproducibility:            always
Severity:                   minor
Priority:                   normal
Status:                     closed
Zaptel Version:             1.4.9.2 
SVN Branch (only for SVN checkouts, not tarball releases): N/A 
SVN Revision (number only!):  
Disclaimer on File?:        N/A 
Request Review:              
Resolution:                 fixed
Fixed in Version:           
====================================================================== 
Date Submitted:             2008-09-17 12:38 CDT
Last Modified:              2008-09-17 12:39 CDT
====================================================================== 
Summary:                    TE412P as PointoPoint data link over 4E1 for 4x2=8Mb
Description: 
Trying to configure TE412P as point to point data link over 4E1 for 4x2=8Mb
data service combinedly . But I am getting only 2Mb data bandwidth with
those 4E1.

Server1 and Server2 are connected using 4xE1 cross cable . Here is below
config what I did .. [Server2 is also same config].

Server-1
=-=-=-=-=
/etc/zaptel.conf
================
span = 1,0,0,ccs,hdb3
span = 2,0,0,ccs,hdb3
span = 3,0,0,ccs,hdb3
span = 4,0,0,ccs,hdb3
nethdlc=1-124:hdlc0

loadzone=us
defaultzone=us