[asterisk-bugs] [DAHDI-tools 0013439]: Can't compile dahdi-tools-trunk using gentoo
Asterisk Bug Tracker
noreply at bugs.digium.com
Mon Sep 15 15:14:35 CDT 2008
A NOTE has been added to this issue.
======================================================================
http://bugs.digium.com/view.php?id=13439
======================================================================
Reported By: covici
Assigned To:
======================================================================
Project: DAHDI-tools
Issue ID: 13439
Category: Utilities
Reproducibility: always
Severity: minor
Priority: normal
Status: feedback
======================================================================
Date Submitted: 2008-09-07 12:52 CDT
Last Modified: 2008-09-15 15:14 CDT
======================================================================
Summary: Can't compile dahdi-tools-trunk using gentoo
Description:
When trying to compile dahdi-tols-trunk using an up-to-date unstable
gentoo, I get the following error:
gcc -g -O2 -I. -O2 -g -fPIC -Wall -DBUILDING_TONEZONE -MD -MT sethdlc.o
-MF .sethdlc.o.d -MP -c -o sethdlc.o sethdlc.c
sethdlc.c: In function 'set_iface':
sethdlc.c:205: error: 'union <anonymous>' has no member named
'ifru_settings'
sethdlc.c:208: error: 'union <anonymous>' has no member named
'ifru_settings'
sethdlc.c:209: error: 'union <anonymous>' has no member named
'ifru_settings'
sethdlc.c:244: error: 'union <anonymous>' has no member named
'ifru_settings'
sethdlc.c:245: error: 'union <anonymous>' has no member named
'ifru_settings'
sethdlc.c:246: error: 'union <anonymous>' has no member named
'ifru_settings'
sethdlc.c:247: error: 'union <anonymous>' has no member named
'ifru_settings'
sethdlc.c:249: error: 'union <anonymous>' has no member named
'ifru_settings'
sethdlc.c: In function 'set_proto_fr':
sethdlc.c:323: error: 'union <anonymous>' has no member named
'ifru_settings'
sethdlc.c:324: error: 'union <anonymous>' has no member named
'ifru_settings'
sethdlc.c: In function 'set_proto_hdlc':
sethdlc.c:361: error: 'union <anonymous>' has no member named
'ifru_settings'
sethdlc.c:362: error: 'union <anonymous>' has no member named
'ifru_settings'
sethdlc.c: In function 'set_proto_cisco':
sethdlc.c:395: error: 'union <anonymous>' has no member named
'ifru_settings'
sethdlc.c:396: error: 'union <anonymous>' has no member named
'ifru_settings'
sethdlc.c: In function 'set_proto':
sethdlc.c:407: error: 'union <anonymous>' has no member named
'ifru_settings'
sethdlc.c:410: error: 'union <anonymous>' has no member named
'ifru_settings'
sethdlc.c:420: error: 'union <anonymous>' has no member named
'ifru_settings'
sethdlc.c:421: error: 'union <anonymous>' has no member named
'ifru_settings'
sethdlc.c:427: error: 'union <anonymous>' has no member named
'ifru_settings'
sethdlc.c:430: error: 'union <anonymous>' has no member named
'ifru_settings'
sethdlc.c: In function 'set_pvc':
sethdlc.c:452: error: 'union <anonymous>' has no member named
'ifru_settings'
sethdlc.c:457: error: 'union <anonymous>' has no member named
'ifru_settings'
sethdlc.c:458: error: 'union <anonymous>' has no member named
'ifru_settings'
sethdlc.c:460: error: 'union <anonymous>' has no member named
'ifru_settings'
sethdlc.c:470: error: 'union <anonymous>' has no member named
'ifru_settings'
sethdlc.c:471: error: 'union <anonymous>' has no member named
'ifru_settings'
sethdlc.c: In function 'show_port':
sethdlc.c:507: error: 'union <anonymous>' has no member named
'ifru_settings'
sethdlc.c:511: error: 'union <anonymous>' has no member named
'ifru_settings'
sethdlc.c:512: error: 'union <anonymous>' has no member named
'ifru_settings'
sethdlc.c:523: error: 'union <anonymous>' has no member named
'ifru_settings'
sethdlc.c:526: error: 'union <anonymous>' has no member named
'ifru_settings'
sethdlc.c:529: error: 'union <anonymous>' has no member named
'ifru_settings'
sethdlc.c:543: error: 'union <anonymous>' has no member named
'ifru_settings'
sethdlc.c:544: error: 'union <anonymous>' has no member named
'ifru_settings'
sethdlc.c:556: error: 'union <anonymous>' has no member named
'ifru_settings'
sethdlc.c:557: error: 'union <anonymous>' has no member named
'ifru_settings'
sethdlc.c:568: error: 'union <anonymous>' has no member named
'ifru_settings'
sethdlc.c:629: error: 'union <anonymous>' has no member named
'ifru_settings'
======================================================================
----------------------------------------------------------------------
(0092528) covici (reporter) - 2008-09-15 15:14
http://bugs.digium.com/view.php?id=13439#c92528
----------------------------------------------------------------------
These are very different files even though they have the same verson number
-- here is what I have.
/*
* INET An implementation of the TCP/IP protocol suite for the LINUX
* operating system. INET is implemented using the BSD Socket
* interface as the means of communication with the user level.
*
* Global definitions for the INET interface module.
*
* Version: @(#)if.h 1.0.2 04/18/93
*
* Authors: Original taken from Berkeley UNIX 4.3, (c) UCB 1982-1988
* Ross Biro
* Fred N. van Kempen, <waltje at uWalt.NL.Mugnet.ORG>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#ifndef _LINUX_IF_H
#define _LINUX_IF_H
#include <linux/types.h> /* for "__kernel_caddr_t" et al */
#include <linux/socket.h> /* for "struct sockaddr" et al */
#include <linux/compiler.h> /* for "__user" et al */
#define IFNAMSIZ 16
#include <linux/hdlc/ioctl.h>
/* Standard interface flags (netdevice->flags). */
#define IFF_UP 0x1 /* interface is up */
#define IFF_BROADCAST 0x2 /* broadcast address valid */
#define IFF_DEBUG 0x4 /* turn on debugging */
#define IFF_LOOPBACK 0x8 /* is a loopback net */
#define IFF_POINTOPOINT 0x10 /* interface is has p-p link */
#define IFF_NOTRAILERS 0x20 /* avoid use of trailers */
#define IFF_RUNNING 0x40 /* interface RFC2863 OPER_UP */
#define IFF_NOARP 0x80 /* no ARP protocol */
#define IFF_PROMISC 0x100 /* receive all packets */
#define IFF_ALLMULTI 0x200 /* receive all multicast packets*/
#define IFF_MASTER 0x400 /* master of a load balancer */
#define IFF_SLAVE 0x800 /* slave of a load balancer */
#define IFF_MULTICAST 0x1000 /* Supports multicast */
#define IFF_PORTSEL 0x2000 /* can set media type */
#define IFF_AUTOMEDIA 0x4000 /* auto media select active */
#define IFF_DYNAMIC 0x8000 /* dialup device with changing addresses*/
#define IFF_LOWER_UP 0x10000 /* driver signals L1 up */
#define IFF_DORMANT 0x20000 /* driver signals dormant */
#define IFF_ECHO 0x40000 /* echo sent packets */
#define
IFF_VOLATILE (IFF_LOOPBACK|IFF_POINTOPOINT|IFF_BROADCAST|IFF_ECHO|\
IFF_MASTER|IFF_SLAVE|IFF_RUNNING|IFF_LOWER_UP|IFF_DORMANT)
/* Private (from user) interface flags (netdevice->priv_flags). */
#define IFF_802_1Q_VLAN 0x1 /* 802.1Q VLAN device.
*/
#define IFF_EBRIDGE 0x2 /* Ethernet bridging device. */
#define IFF_SLAVE_INACTIVE 0x4 /* bonding slave not the curr. active */
#define IFF_MASTER_8023AD 0x8 /* bonding master, 802.3ad. */
#define IFF_MASTER_ALB 0x10 /* bonding master, balance-alb. */
#define IFF_BONDING 0x20 /* bonding master or slave */
#define IFF_SLAVE_NEEDARP 0x40 /* need ARPs for validation */
#define IFF_ISATAP 0x80 /* ISATAP interface (RFC4214) */
#define IF_GET_IFACE 0x0001 /* for querying only */
#define IF_GET_PROTO 0x0002
/* For definitions see hdlc.h */
#define IF_IFACE_V35 0x1000 /* V.35 serial interface */
#define IF_IFACE_V24 0x1001 /* V.24 serial interface */
#define IF_IFACE_X21 0x1002 /* X.21 serial interface */
#define IF_IFACE_T1 0x1003 /* T1 telco serial interface */
#define IF_IFACE_E1 0x1004 /* E1 telco serial interface */
#define IF_IFACE_SYNC_SERIAL 0x1005 /* can't be set by software */
#define IF_IFACE_X21D 0x1006 /* X.21 Dual Clocking (FarSite)
*/
/* For definitions see hdlc.h */
#define IF_PROTO_HDLC 0x2000 /* raw HDLC protocol */
#define IF_PROTO_PPP 0x2001 /* PPP protocol */
#define IF_PROTO_CISCO 0x2002 /* Cisco HDLC protocol */
#define IF_PROTO_FR 0x2003 /* Frame Relay protocol */
#define IF_PROTO_FR_ADD_PVC 0x2004 /* Create FR PVC */
#define IF_PROTO_FR_DEL_PVC 0x2005 /* Delete FR PVC */
#define IF_PROTO_X25 0x2006 /* X.25 */
#define IF_PROTO_HDLC_ETH 0x2007 /* raw HDLC, Ethernet emulation */
#define IF_PROTO_FR_ADD_ETH_PVC 0x2008 /* Create FR Ethernet-bridged PVC
*/
#define IF_PROTO_FR_DEL_ETH_PVC 0x2009 /* Delete FR Ethernet-bridged PVC
*/
#define IF_PROTO_FR_PVC 0x200A /* for reading PVC status */
#define IF_PROTO_FR_ETH_PVC 0x200B
#define IF_PROTO_RAW 0x200C /* RAW Socket
*/
/* RFC 2863 operational status */
enum {
IF_OPER_UNKNOWN,
IF_OPER_NOTPRESENT,
IF_OPER_DOWN,
IF_OPER_LOWERLAYERDOWN,
IF_OPER_TESTING,
IF_OPER_DORMANT,
IF_OPER_UP,
};
/* link modes */
enum {
IF_LINK_MODE_DEFAULT,
IF_LINK_MODE_DORMANT, /* limit upward transition to dormant */
};
/*
* Device mapping structure. I'd just gone off and designed a
* beautiful scheme using only loadable modules with arguments
* for driver options and along come the PCMCIA people 8)
*
* Ah well. The get() side of this is good for WDSETUP, and it'll
* be handy for debugging things. The set side is fine for now and
* being very small might be worth keeping for clean configuration.
*/
struct ifmap
{
unsigned long mem_start;
unsigned long mem_end;
unsigned short base_addr;
unsigned char irq;
unsigned char dma;
unsigned char port;
/* 3 bytes spare */
};
struct if_settings
{
unsigned int type; /* Type of physical device or protocol */
unsigned int size; /* Size of the data allocated by the caller */
union {
/* {atm/eth/dsl}_settings anyone ? */
raw_hdlc_proto __user *raw_hdlc;
cisco_proto __user *cisco;
fr_proto __user *fr;
fr_proto_pvc __user *fr_pvc;
fr_proto_pvc_info __user *fr_pvc_info;
/* interface settings */
sync_serial_settings __user *sync;
te1_settings __user *te1;
} ifs_ifsu;
};
/*
* Interface request structure used for socket
* ioctl's. All interface ioctl's must have parameter
* definitions which begin with ifr_name. The
* remainder may be interface specific.
*/
struct ifreq
{
#define IFHWADDRLEN 6
union
{
char ifrn_name[IFNAMSIZ]; /* if name, e.g. "en0" */
} ifr_ifrn;
union {
struct sockaddr ifru_addr;
struct sockaddr ifru_dstaddr;
struct sockaddr ifru_broadaddr;
struct sockaddr ifru_netmask;
struct sockaddr ifru_hwaddr;
short ifru_flags;
int ifru_ivalue;
int ifru_mtu;
struct ifmap ifru_map;
char ifru_slave[IFNAMSIZ]; /* Just fits the size */
char ifru_newname[IFNAMSIZ];
void __user * ifru_data;
struct if_settings ifru_settings;
} ifr_ifru;
};
#define ifr_name ifr_ifrn.ifrn_name /* interface name */
#define ifr_hwaddr ifr_ifru.ifru_hwaddr /* MAC address */
#define ifr_addr ifr_ifru.ifru_addr /* address */
#define ifr_dstaddr ifr_ifru.ifru_dstaddr /* other end of p-p lnk */
#define ifr_broadaddr ifr_ifru.ifru_broadaddr /* broadcast address */
#define ifr_netmask ifr_ifru.ifru_netmask /* interface net mask */
#define ifr_flags ifr_ifru.ifru_flags /* flags */
#define ifr_metric ifr_ifru.ifru_ivalue /* metric */
#define ifr_mtu ifr_ifru.ifru_mtu /* mtu */
#define ifr_map ifr_ifru.ifru_map /* device map */
#define ifr_slave ifr_ifru.ifru_slave /* slave device */
#define ifr_data ifr_ifru.ifru_data /* for use by interface */
#define ifr_ifindex ifr_ifru.ifru_ivalue /* interface index */
#define ifr_bandwidth ifr_ifru.ifru_ivalue /* link bandwidth */
#define ifr_qlen ifr_ifru.ifru_ivalue /* Queue length */
#define ifr_newname ifr_ifru.ifru_newname /* New name */
#define ifr_settings ifr_ifru.ifru_settings /* Device/proto settings*/
/*
* Structure used in SIOCGIFCONF request.
* Used to retrieve interface configuration
* for machine (useful for programs which
* must know all networks accessible).
*/
struct ifconf
{
int ifc_len; /* size of buffer */
union
{
char __user *ifcu_buf;
struct ifreq __user *ifcu_req;
} ifc_ifcu;
};
#define ifc_buf ifc_ifcu.ifcu_buf /* buffer address */
#define ifc_req ifc_ifcu.ifcu_req /* array of structures */
#endif /* _LINUX_IF_H */
Issue History
Date Modified Username Field Change
======================================================================
2008-09-15 15:14 covici Note Added: 0092528
======================================================================
More information about the asterisk-bugs
mailing list