[asterisk-bugs] [Asterisk 0013477]: rc6: no dial tone on chan_dahdi

[Asterisk Bug Tracker]

The following issue has been SUBMITTED. 
====================================================================== 
http://bugs.digium.com/view.php?id=13477 
====================================================================== 
Reported By:                seandarcy
Assigned To:                
====================================================================== 
Project:                    Asterisk
Issue ID:                   13477
Category:                   Channels/chan_dahdi
Reproducibility:            always
Severity:                   major
Priority:                   normal
Status:                     new
Asterisk Version:           1.6.0-rc6 
SVN Branch (only for SVN checkouts, not tarball releases): N/A 
SVN Revision (number only!):  
Disclaimer on File?:        N/A 
Request Review:              
====================================================================== 
Date Submitted:             2008-09-13 11:21 CDT
Last Modified:              2008-09-13 11:21 CDT
====================================================================== 
Summary:                    rc6: no dial tone on chan_dahdi
Description: 
tdm400p, rc6 and dahdi-linux rc4:

WARNING[2875]: chan_dahdi.c:7525 handle_init_event: Unable to play
dialtone on channel 2, do you have defaultzone and loadzone defined?
    -- Starting simple switch on 'DAHDI/2-1'

cat /etc/dahdi/system.conf
fxoks=1,2
fxsks=4

loadzone	= us
defaultzone	= us
channels=1,2

echocanceller=mg2,1,2,4

from dahdi_scan 2
dahdi: Dump of DAHDI Channel 2 (WCTDM/4/1,2,2):

dahdi: flags: 201 hex, writechunk: f7ed4c00, readchunk: f7ed4c0c
dahdi: rxgain: f90cde7c, txgain: f90cde7c, gainalloc: 0
dahdi: span: f7ed4008, sig: 1020 hex, sigcap: 50f8 hex
dahdi: inreadbuf: -1, outreadbuf: -1, inwritebuf: -1, outwritebuf: -1
dahdi: blocksize: 0, numbufs: 2, txbufpolicy: 0, txbufpolicy: 0
dahdi: txdisable: 0, rxdisable: 0, iomask: 0
dahdi: curzone: 00000000, tonezone: 0, curtone: 00000000, tonep: 0
dahdi: digitmode: 0, txdialbuf: , dialing: 0, aftdialtimer: 0, cadpos. 0
dahdi: confna: 0, confn: 0, confmode: 0, confmute: 0
dahdi: ec: 00000000, echocancel: 0, deflaw: 0, xlaw: f90b0d04
dahdi: echostate: 00, echotimer: 0, echolastupdate: 0
dahdi: itimer: 0, otimer: 0, ringdebtimer: 0

cat  chan_dahdi.conf
[trunkgroups]

[channels]
usecallerid=yes
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
echotraining=yes

group=1
callgroup=1
pickupgroup=1

callprogress=yes
progzone=us
tonezone = 0 ; 0 is US
;;defaultzone=0
defaultzone = us
;;loadzone=0
loadzone=us
jbenable = yes              ; Enables the use of a jitterbuffer on the
receiving side of a
                              ; DAHDI channel. Defaults to "no".

;;;[home-phones]
context=internal      ; Uses the [internal] context in extensions.conf
signalling=auto     ; fxo_ks Use FXO signalling for an FXS channel - as
set in sytem.conf.conf
channel => 1          ; Telephone attached to port 1
channel => 2          ; Telephone attached to port 2
;dahdichan => 1,2

;;;[pstn]
context=incoming-pstn-line  ; Incoming calls go to [incoming-pstn-line] in
extensions.conf
signalling=auto     ; fxs_ks Use FXS signalling for an FXO channel - use
as set in system.conf
faxdetect=incoming
busydetect=yes
channel => 4
;;dahdichan => 4          ; PSTN attached to port 4
====================================================================== 

Issue History 
Date Modified    Username       Field                    Change               
====================================================================== 
2008-09-13 11:21 seandarcy      Asterisk Version          => 1.6.0-rc6       
2008-09-13 11:21 seandarcy      SVN Branch (only for SVN checkouts, not tarball
releases) => N/A             
======================================================================