[asterisk-bugs] [DAHDI-linux 0013897]: [patch] Support for generic HFC-4S cards
Asterisk Bug Tracker
noreply at bugs.digium.com
Wed Nov 19 11:21:52 CST 2008
A NOTE has been added to this issue.
======================================================================
http://bugs.digium.com/view.php?id=13897
======================================================================
Reported By: tzafrir
Assigned To:
======================================================================
Project: DAHDI-linux
Issue ID: 13897
Category: wcb4xxp
Reproducibility: N/A
Severity: feature
Priority: normal
Status: new
======================================================================
Date Submitted: 2008-11-13 16:17 CST
Last Modified: 2008-11-19 11:21 CST
======================================================================
Summary: [patch] Support for generic HFC-4S cards
Description:
A patch to add some basic support of other HFC-4S -based PCI cards (such as
the ones made by Junghanns).
Status: gets rid of the echo canceller messages when not needed, but still
needs work.
Specifically:
* It adds too broad a range of cards (which also include bero.net cards)
* The range may include some 2-ports cards, which will probably not work.
Not yet tested to work, though it it is at least configured.
======================================================================
----------------------------------------------------------------------
(0095081) jdg (reporter) - 2008-11-19 11:21
http://bugs.digium.com/view.php?id=13897#c95081
----------------------------------------------------------------------
Ouput of lspci below.
It's now working hour here (GMT-10), so I need a functionnal Asterisk, I'm
back on bristuff-0.4.0-RC4-xr5. As far as I remember, /proc/dahdi/* looked
ok to me.
I will be able to do more testing tonight.
04:01.0 ISDN controller: Cologne Chip Designs GmbH ISDN network Controller
[HFC-4S] (rev 01)
Subsystem: Cologne Chip Designs GmbH HFC-4S [Junghanns DuoDBRI]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at 9400 [size=8]
Region 1: Memory at e0005000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Issue History
Date Modified Username Field Change
======================================================================
2008-11-19 11:21 jdg Note Added: 0095081
======================================================================
More information about the asterisk-bugs
mailing list