[asterisk-bugs] [Asterisk 0013668]: sip show inuse count is negative

[Asterisk Bug Tracker]

The following issue has been RESOLVED. 
====================================================================== 
http://bugs.digium.com/view.php?id=13668 
====================================================================== 
Reported By:                mjc
Assigned To:                putnopvut
====================================================================== 
Project:                    Asterisk
Issue ID:                   13668
Category:                   Channels/chan_sip/General
Reproducibility:            random
Severity:                   minor
Priority:                   normal
Status:                     resolved
Asterisk Version:           1.6.0 
SVN Branch (only for SVN checkouts, not tarball releases): N/A 
SVN Revision (number only!):  
Disclaimer on File?:        N/A 
Request Review:              
Resolution:                 fixed
Fixed in Version:           
====================================================================== 
Date Submitted:             2008-10-10 15:02 CDT
Last Modified:              2008-11-18 14:23 CST
====================================================================== 
Summary:                    sip show inuse count is negative
Description: 
I have a bunch of snom 360s and asterisk-1.6.0-rc6. The snom BLF LEDs
monitor hints. However, the hints are getting confused and inverting state
sometimes. That is, unused extensions are being shown as in-use, and
vice-versa.

If I run "sip show inuse" during these times, I see entries like this:

steerpike*CLI> sip show inuse
* User name               In use          Limit
mjc_server                0               10
mjc_library               0               10
mjc_lab                   0               10
mjc_office                0               10
mjc_home                  0               10
* Peer name               In use          Limit
mjc_server                0/0/0           10
mjc_library               0/0/0           10
mjc_lab                   -1/0/0          10
mjc_office                0/0/0           10
mjc_home                  0/0/0           10

Note the "-1"! This is nonsense, and results in an "in use" hint:

steerpike*CLI> core show hints
                    601 at internal            : SIP/mjc_office&SIP/m 
State:InUse           Watchers 11

where the defined hint is:

exten =>
601,hint,SIP/mjc_office&SIP/mjc_home&SIP/mjc_lab&SIP/mjc_server&SIP/mjc_library


Somehow, the call count is being decremented by 2 after a hangup (from 1
to -1). Call counts should be clamped at zero, I would suggest.

This problem did not occur on the same system when we had 1.2.x and 1.4.x
running.

- Mike
====================================================================== 

Issue History 
Date Modified    Username       Field                    Change               
====================================================================== 
2008-11-18 14:23 svnbot         Status                   acknowledged =>
resolved
2008-11-18 14:23 svnbot         Resolution               reopened => fixed   
======================================================================