[asterisk-bugs] [Asterisk 0013824]: pulsedial=yes does not work

[Asterisk Bug Tracker]

A NOTE has been added to this issue. 
====================================================================== 
http://bugs.digium.com/view.php?id=13824 
====================================================================== 
Reported By:                ajlill
Assigned To:                
====================================================================== 
Project:                    Asterisk
Issue ID:                   13824
Category:                   Channels/chan_zap
Reproducibility:            always
Severity:                   major
Priority:                   normal
Status:                     new
Asterisk Version:           1.4.21.2 
SVN Branch (only for SVN checkouts, not tarball releases): N/A 
SVN Revision (number only!):  
Disclaimer on File?:        N/A 
Request Review:              
====================================================================== 
Date Submitted:             2008-11-02 13:20 CST
Last Modified:              2008-11-04 08:09 CST
====================================================================== 
Summary:                    pulsedial=yes does not work
Description: 
Setting pulsedial=yes in zapata.conf does not work. I added debugging
statements in process_zap and the file is being parsed properly, and the
field  confp->chan.pulse is being set correctly. However, the value is
being reset to 0 somewhere, and so it only tries to tone dial. I added an
extra line so 'zap show channel' will print the value of that field, and it
is 0.

This is on Debian Etch. When I was using 1.2.x, it worked fine.
====================================================================== 

---------------------------------------------------------------------- 
 (0094539) ajlill (reporter) - 2008-11-04 08:09
 http://bugs.digium.com/view.php?id=13824#c94539 
---------------------------------------------------------------------- 
I don't have a users.conf file. Here's the zapata.conf file.

;autogenerated by /usr/local/sbin/config-zaptel  do not hand edit
;Zaptel Channels Configurations (zapata.conf)
;
;For detailed zapata options, view /etc/asterisk/zapata.conf.orig

[trunkgroups]

[channels]
context=default
usecallerid=no
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
relaxdtmf=yes
rxgain=3.0
txgain=0.0
group=1
callgroup=1
pickupgroup=1

immediate=no

;Sangoma A200 [slot:10 bus:0 span:1]  <wanpipe1>
context=downstairs
group=1
signalling = fxo_ks
channel => 1

context=upstairs
group=1
signalling = fxo_ks
channel => 2

context=work-line
group=0
signalling = fxs_ks
channel => 3
rxgain=5.0

context=home-line
group=0
signalling = fxs_ks
channel => 4
pulsedial = yes
pulse = yes 
rxgain=5.0 

Issue History 
Date Modified    Username       Field                    Change               
====================================================================== 
2008-11-04 08:09 ajlill         Note Added: 0094539                          
======================================================================