[asterisk-bugs] [Asterisk-GUI 0012635]: Card detection not working when analog and digital both present

[noreply at bugs.digium.com]

A NOTE has been added to this issue. 
====================================================================== 
http://bugs.digium.com/view.php?id=12635 
====================================================================== 
Reported By:                msales
Assigned To:                bkruse
====================================================================== 
Project:                    Asterisk-GUI
Issue ID:                   12635
Category:                   Card Detection
Reproducibility:            always
Severity:                   major
Priority:                   normal
Status:                     feedback
Asterisk Version:           1.4.19 
SVN Branch (only for SVN checkouts, not tarball releases): N/A 
SVN Revision (number only!):  
Disclaimer on File?:        N/A 
Request Review:              
====================================================================== 
Date Submitted:             05-13-2008 10:19 CDT
Last Modified:              05-13-2008 12:08 CDT
====================================================================== 
Summary:                    Card detection not working when analog and digital
both present
Description: 
Currently running asterisk 1.4.19.1, Zaptel 1.4 branch revision 4258,
Asterisk-GUI revision 3046.

I installed a TDM2431B.  The GUI detected and configured that card
correctly.  I pulled that card and installed TE122P.  The GUI detected and
configured that card correctly.  I installed the TDM2431B and the TE122P
together and the GUI is detecting them both as digital cards and reporting
no analog hardware.
====================================================================== 

---------------------------------------------------------------------- 
 msales - 05-13-08 12:08  
---------------------------------------------------------------------- 
Yes, I have rmmod the drivers and reloaded, restarted zaptel, restarted
asterisk, and rebooted the system to no avail.  Let me add both cards have
the VPMADT032 echo cancel module as well.

ZTSCAN.CONF

[1]
active=yes
alarms=RED
description=Wildcard TE122 Card 0
name=WCT1/0
manufacturer=Digium
devicetype=Wildcard TE122
location=PCI Bus 04 Slot 03
basechan=1
totchans=24
irq=66
type=digital-T1
syncsrc=0
lbo=0 db (CSU)/0-133 feet (DSX-1)
coding_opts=B8ZS,AMI
framing_opts=ESF,D4
coding=B8ZS
framing=ESF
[2]
active=yes
alarms=UNCONFIGURED
description=Wildcard TDM2400P Board 1
name=WCTDM/0
manufacturer=Digium
devicetype=Wildcard TDM2400P with VPMADT032
location=PCI Bus 07 Slot 01
basechan=1
totchans=24
irq=58
type=digital-
syncsrc=0
lbo=0 db (CSU)/0-133 feet (DSX-1)
coding_opts=
framing_opts=
coding=
framing=

ZAPTEL.CONF:

span = 1,1,0,esf,b8zs
bchan = 1-23
dchan = 24
loadzone = us
defaultzone = us

USERS.CONF:  (there is only 1 entry here)

[span_1]
switchtype = national
signalling = pri_cpe
trunkname = Span 1
trunkstyle = digital
hassip = no
hasiax = no
hasexten = no
group = 1
context = DID_span_1
zapchan = 1-23 

Issue History 
Date Modified   Username       Field                    Change               
====================================================================== 
05-13-08 12:08  msales         Note Added: 0086789                          
======================================================================