[asterisk-bugs] [Asterisk 0012849]: DTMF detection issue in GSM gateway

[noreply at bugs.digium.com]

A NOTE has been added to this issue. 
====================================================================== 
http://bugs.digium.com/view.php?id=12849 
====================================================================== 
Reported By:                jankrishnan
Assigned To:                
====================================================================== 
Project:                    Asterisk
Issue ID:                   12849
Category:                   Addons/General
Reproducibility:            always
Severity:                   minor
Priority:                   normal
Status:                     feedback
Asterisk Version:           1.4.17 
SVN Branch (only for SVN checkouts, not tarball releases): N/A 
SVN Revision (number only!):  
Disclaimer on File?:        N/A 
Request Review:              
====================================================================== 
Date Submitted:             06-13-2008 03:54 CDT
Last Modified:              06-24-2008 07:54 CDT
====================================================================== 
Summary:                    DTMF detection issue in GSM gateway
Description: 
I am using the GSM gateway(MV-370) for communication with mobile network
from asterisk. In detail,
SIM card is placed in MV-370,
Configured one sip account for this gateway in asterisk, so whenever i
making the from outside to this gateway, it will be landed on configured
sip account. I designed the dialplan is such a way to get the dtmf(Read()
application in asterisk) from the remote end. But, here when pressing the
dtmf digits from remote end, it is not detected. Always saying that no
digits has been pressed,

sip.conf configuration,
;GSM VOIP Gateway MV-370
[103]
type=friend
username=103
secret=103
context=gateway
dtmfmode=inband
host=dynamic
nat=never
canreinvite=no
insecure=very
qualify=yes
disallow=all
allow=ulaw
allow=alaw

in the above i tried with the dtmfmode as info and rfc2833, but i got the
same result.

could you please direct or suggest me in a right direction?

Thanks in advance,
jankrishnan
====================================================================== 

---------------------------------------------------------------------- 
 marsosa - 06-24-08 07:54  
---------------------------------------------------------------------- 
Can you post a 'sip debug' of a test call? also, did you make sure that the
codec id of rfc2833 is set to 101? i'm not sure if it was the default
value.
Another thing you may try is to send the call to a "SendDTMF(12345)" line
in the dialplan, to see if you can hear those tones or not. 

Issue History 
Date Modified   Username       Field                    Change               
====================================================================== 
06-24-08 07:54  marsosa        Note Added: 0089143                          
======================================================================