[asterisk-bugs] [Zaptel 0011020]: zapconf does not complete if a system has no usb

Sat Jun 7 13:35:32 CDT 2008

A NOTE has been added to this issue. 
====================================================================== 
http://bugs.digium.com/view.php?id=11020 
====================================================================== 
Reported By:                jmls
Assigned To:                qwell
====================================================================== 
Project:                    Zaptel
Issue ID:                   11020
Category:                   Utilities
Reproducibility:            always
Severity:                   block
Priority:                   normal
Status:                     closed
Zaptel Version:             1.4.5.1  
SVN Branch (only for SVN checkouts, not tarball releases): N/A  
SVN Revision (number only!):  
Disclaimer on File?:        N/A 
Request Review:              
Resolution:                 fixed
Fixed in Version:           
====================================================================== 
Date Submitted:             10-18-2007 00:37 CDT
Last Modified:              06-07-2008 13:35 CDT
====================================================================== 
Summary:                    zapconf does not complete if a system has no usb
Description: 
trying to run zapconf on a server with no usb, I get the following error:

Failed to open /proc/bus/usb/devices: No such file or directory at
xpp/utils/zconf/Zaptel/Hardware/USB.pm line 88.

and zapconf seems to stop there.
====================================================================== 

---------------------------------------------------------------------- 
 svnbot - 06-07-08 13:35  
---------------------------------------------------------------------- 
Repository: dahdi
Revision: 3287

_U  betas/zaptel-1.2-te12x-vpm/
U   betas/zaptel-1.2-te12x-vpm/Makefile
U   betas/zaptel-1.2-te12x-vpm/README
U   betas/zaptel-1.2-te12x-vpm/doc/fxotune.8
U   betas/zaptel-1.2-te12x-vpm/fxotune.c
U   betas/zaptel-1.2-te12x-vpm/sethdlc-new.c
U   betas/zaptel-1.2-te12x-vpm/sethdlc.c
U   betas/zaptel-1.2-te12x-vpm/wct4xxp/base.c
U   betas/zaptel-1.2-te12x-vpm/wct4xxp/vpm450m.c
U   betas/zaptel-1.2-te12x-vpm/wctc4xxp/base.c
U   betas/zaptel-1.2-te12x-vpm/wctc4xxp/tc400m-firmware.bin
U   betas/zaptel-1.2-te12x-vpm/wctdm24xxp/base.c
U   betas/zaptel-1.2-te12x-vpm/wctdm24xxp/wctdm24xxp.h
U   betas/zaptel-1.2-te12x-vpm/xpp/.version
D   betas/zaptel-1.2-te12x-vpm/xpp/ChangeLog
A   betas/zaptel-1.2-te12x-vpm/xpp/Changelog_xpp
U   betas/zaptel-1.2-te12x-vpm/xpp/Makefile
U   betas/zaptel-1.2-te12x-vpm/xpp/README.Astribank
U   betas/zaptel-1.2-te12x-vpm/xpp/card_fxo.c
U   betas/zaptel-1.2-te12x-vpm/xpp/card_fxs.c
U   betas/zaptel-1.2-te12x-vpm/xpp/card_pri.c
D   betas/zaptel-1.2-te12x-vpm/xpp/firmwares/USB_1130.hex
D   betas/zaptel-1.2-te12x-vpm/xpp/firmwares/USB_1140.hex
D   betas/zaptel-1.2-te12x-vpm/xpp/firmwares/USB_1150.hex
A   betas/zaptel-1.2-te12x-vpm/xpp/firmwares/USB_FW.hex
U   betas/zaptel-1.2-te12x-vpm/xpp/init_card_3_29
U   betas/zaptel-1.2-te12x-vpm/xpp/init_card_4_29
U   betas/zaptel-1.2-te12x-vpm/xpp/utils/fpga_load.c
U   betas/zaptel-1.2-te12x-vpm/xpp/utils/genzaptelconf
U   betas/zaptel-1.2-te12x-vpm/xpp/utils/print_modes.c
U   betas/zaptel-1.2-te12x-vpm/xpp/utils/xpp_fxloader
A   betas/zaptel-1.2-te12x-vpm/xpp/utils/zaptel_drivers
U   betas/zaptel-1.2-te12x-vpm/xpp/utils/zaptel_hardware
U   betas/zaptel-1.2-te12x-vpm/xpp/utils/zconf/Zaptel/Chans.pm
U   betas/zaptel-1.2-te12x-vpm/xpp/utils/zconf/Zaptel/Hardware/PCI.pm
U   betas/zaptel-1.2-te12x-vpm/xpp/utils/zconf/Zaptel/Hardware/USB.pm
U   betas/zaptel-1.2-te12x-vpm/xpp/utils/zconf/Zaptel/Hardware.pm
U   betas/zaptel-1.2-te12x-vpm/xpp/utils/zconf/Zaptel/Xpp/Xbus.pm
U   betas/zaptel-1.2-te12x-vpm/xpp/utils/zconf/Zaptel/Xpp.pm
U   betas/zaptel-1.2-te12x-vpm/xpp/utils/zt_registration
U   betas/zaptel-1.2-te12x-vpm/xpp/xbus-core.c
U   betas/zaptel-1.2-te12x-vpm/xpp/xdefs.h
U   betas/zaptel-1.2-te12x-vpm/xpp/xpd.h
U   betas/zaptel-1.2-te12x-vpm/xpp/xpp_usb.c
U   betas/zaptel-1.2-te12x-vpm/xpp/xpp_zap.c
U   betas/zaptel-1.2-te12x-vpm/xpp/xproto.c
U   betas/zaptel-1.2-te12x-vpm/xpp/xproto.h
U   betas/zaptel-1.2-te12x-vpm/zconfig.h
U   betas/zaptel-1.2-te12x-vpm/ztdynamic.c
U   betas/zaptel-1.2-te12x-vpm/ztmonitor.c

------------------------------------------------------------------------
r3287 | mspiceland | 2008-06-07 13:35:27 -0500 (Sat, 07 Jun 2008) | 151
lines

Merged revisions
3119-3120,3132,3138,3142,3146,3152-3153,3157,3169,3179,3188,3201,3205,3209,3215,3217,3222,3229-3232,3241,3243,3258,3263
via svnmerge from 
https://origsvn.digium.com/svn/zaptel/branches/1.2

........
r3119 | mattf | 2007-10-05 14:11:20 -0500 (Fri, 05 Oct 2007) | 1 line

Make sure we make the transocder device node if no dynamic device
filesystem found.
........
r3120 | mattf | 2007-10-05 14:45:31 -0500 (Fri, 05 Oct 2007) | 1 line

Forgot to remove before we create the device node
........
r3132 | mattf | 2007-10-12 17:19:58 -0500 (Fri, 12 Oct 2007) | 1 line

Fix for false power alarms, as well as a clock polarity issue
........
r3138 | kpfleming | 2007-10-16 11:39:56 -0500 (Tue, 16 Oct 2007) | 2 lines

use latest Octasic API release

........
r3142 | tzafrir | 2007-10-16 12:55:05 -0500 (Tue, 16 Oct 2007) | 14 lines

xpp r4892:
* Zaptel/Hardware perl modules:
  - Use sysfs directly. Don't rely on lspci/lsusb.
  - Each device has a description and driver name.
  - Zaptel::Hardware::drivers() to show the list of required drivers
    for this system (see zaptel_drivers).
  - zaptel_hardware shows a description and a (suggested?) driver.
* zt_registration sorts by Serial first and only then by connector.
* USB_FW.hex replaces all the USB_11x0.hex .
  - Separate USB interface for the management processor.
  - Hence fpga_load can now work even with drivers loaded.
* Fix firmware upgrading.
* Fix manual firmware loading while auto-loading.

........
r3146 | tzafrir | 2007-10-16 15:21:45 -0500 (Tue, 16 Oct 2007) | 2 lines

Some modumentation.

........
r3152 | tzafrir | 2007-10-18 10:24:34 -0500 (Thu, 18 Oct 2007) | 2 lines

Make opermode work again.

........
r3153 | tzafrir | 2007-10-18 13:04:12 -0500 (Thu, 18 Oct 2007) | 5 lines

 * zaptel-perl should not panic when there is no /proc/bus/usb (Closes
   http://bugs.digium.com/view.php?id=11020).
 * Don't build metering by default for now.
 * And this is xpp rev 4900.

........
r3157 | tzafrir | 2007-10-18 14:31:37 -0500 (Thu, 18 Oct 2007) | 2 lines

Fix zaptel_hardware's behaviour for unknown span types.

........
r3169 | qwell | 2007-10-18 17:56:14 -0500 (Thu, 18 Oct 2007) | 4 lines

Correct the name of the wct4xxp driver.

Issue 11030

........
r3179 | mattf | 2007-10-20 14:49:06 -0500 (Sat, 20 Oct 2007) | 1 line

Update fxotune in 1.2 to be the same as fxotune in 1.4.  Should have been
done a long time ago
........
r3188 | mattf | 2007-10-26 10:08:37 -0500 (Fri, 26 Oct 2007) | 1 line

Another clock polarity update.  To fix garbage audio on some systems with
the wctdm24xxp driver and VPMADT032
........
r3201 | tzafrir | 2007-10-31 08:06:12 -0500 (Wed, 31 Oct 2007) | 2 lines

Also get fxotne's man page from 1.4 .

........
r3205 | mmichelson | 2007-10-31 16:08:15 -0500 (Wed, 31 Oct 2007) | 5
lines

Fixed potential buffer overflow.

See AST-2007-024 for more details

........
r3209 | mattf | 2007-11-03 11:10:49 -0500 (Sat, 03 Nov 2007) | 1 line

Major update for tc4xxp driver.  Fixes many outstanding issues related to
channel lockups, etc.  It also raises the maximum channel count for g.729
to 120 channels.
........
r3215 | mattf | 2007-11-06 15:13:09 -0600 (Tue, 06 Nov 2007) | 1 line

Cross port fxo line voltage monitoring patch from wctdm to wctdm24xxp
........
r3217 | tzafrir | 2007-11-07 08:22:02 -0600 (Wed, 07 Nov 2007) | 4 lines

* zaptel-perl, genzaptelconf: Detect and list Rhino cards.
* zaptel-perl: Fix reporting of empty slots in analog Digium cards.
* genzaptelconf: More readable case-s.

........
r3222 | tzafrir | 2007-11-10 05:33:37 -0600 (Sat, 10 Nov 2007) | 2 lines

Get rid of a pointless static buffer and strcpy.

........
r3229 | tzafrir | 2007-11-14 08:53:28 -0600 (Wed, 14 Nov 2007) | 2 lines

Fix a deadlock spotted on some SMP installations.

........
r3230 | tzafrir | 2007-11-14 08:55:43 -0600 (Wed, 14 Nov 2007) | 2 lines

Improve (reduce) signal attenuation on FXO ports.

........
r3231 | tzafrir | 2007-11-14 08:59:20 -0600 (Wed, 14 Nov 2007) | 2 lines

Increase FXS ring detect debounce interval.

........
r3232 | tzafrir | 2007-11-14 09:03:02 -0600 (Wed, 14 Nov 2007) | 2 lines

Changelog for xpp r5010.

........
r3241 | mattf | 2007-11-21 16:45:32 -0600 (Wed, 21 Nov 2007) | 1 line

Transcoder driver updates.  Fixes G.723 no audio issues with latest
drivers
........
r3243 | mattf | 2007-11-21 17:51:48 -0600 (Wed, 21 Nov 2007) | 1 line

Add new product support
........
r3258 | file | 2007-11-28 16:52:54 -0600 (Wed, 28 Nov 2007) | 6 lines

Pass the correct variable to sizeof when copying the driver name.
(closes issue http://bugs.digium.com/view.php?id=11352)
Reported by: brettcar
Patches:
      ztdynamic.c.patch uploaded by eliel (license 64)

........
r3263 | mattf | 2007-11-30 14:17:42 -0600 (Fri, 30 Nov 2007) | 1 line

Make sure we only disable irqs during octasic firmware load only if we
have 4K stacks
........

------------------------------------------------------------------------

http://svn.digium.com/view/dahdi?view=rev&revision=3287 

Issue History 
Date Modified   Username       Field                    Change               
====================================================================== 
06-07-08 13:35  svnbot         Note Added: 0088337                          
======================================================================