[asterisk-bugs] [Zaptel 0012531]: UK CallerID on TDM400P not reliable
noreply at bugs.digium.com
noreply at bugs.digium.com
Wed Jun 4 03:18:33 CDT 2008
A NOTE has been added to this issue.
======================================================================
http://bugs.digium.com/view.php?id=12531
======================================================================
Reported By: mattbrown
Assigned To:
======================================================================
Project: Zaptel
Issue ID: 12531
Category: wctdm
Reproducibility: always
Severity: major
Priority: normal
Status: new
Zaptel Version: 1.4.10
SVN Branch (only for SVN checkouts, not tarball releases): N/A
SVN Revision (number only!):
Disclaimer on File?: N/A
Request Review:
======================================================================
Date Submitted: 04-26-2008 11:45 CDT
Last Modified: 06-04-2008 03:18 CDT
======================================================================
Summary: UK CallerID on TDM400P not reliable
Description:
Currently using Asterisk 1.4.19 and Zaptel 1.4.10
Incoming calls (most) fail to populate the CallerID resulting in the
following:
[Apr 26 16:21:13] NOTICE[12685]: chan_zap.c:6191 ss_thread: Got event
2 (Ring/Answered)...
[Apr 26 16:21:15] WARNING[12685]: chan_zap.c:6254 ss_thread: CID timed
out waiting for ring. Exiting simple switch
However some calls do populate the callerid.
In order to get reliable CallerID I had to regress to Zaptel 1.4.5.1 and
apply the patch submitted under the following bug report:
http://bugs.digium.com/view.php?id=9264
I note from this bug that this has now been included into Zaptel > 1.4.10
? and requires the switch in zapata.conf fwringdetect=1 however the code
fails to work reliably as it did when patched against 1.4.5.1
======================================================================
----------------------------------------------------------------------
mattbrown - 06-04-08 03:18
----------------------------------------------------------------------
Reverted back to Zaptel 1.4.5.1 with patch file and CallerID works as
expected everytime.
== Starting post polarity CID detection on channel 4
-- Starting simple switch on 'Zap/4-1'
[Jun 4 09:21:15] NOTICE[9493]: chan_zap.c:6234 ss_thread: CallerID
number: 07875-284xxx, name: (null), flags=4
-- Executing [s at incoming:1] Verbose("Zap/4-1", "Incoming call from BT
line CallerID="" <07875284xxx>") in new stack
Incoming call from BT line CallerID="" <07875284xxx>
-- Executing [s at incoming:2] GotoIf("Zap/4-1", "0?3:8") in new stack
-- Goto (incoming,s,8)
-- Executing [s at incoming:8] GotoIf("Zap/4-1", "0?9:11") in new stack
-- Goto (incoming,s,11)
-- Executing [s at incoming:11] Set("Zap/4-1", "CALLERID(all)=Incoming
Main: <07875284xxx>") in new stack
-- Executing [s at incoming:12] NoOp("Zap/4-1", "Finish
if-if-incoming-1-2") in new stack
-- Executing [s at incoming:13] MixMonitor("Zap/4-1", "1212567674.0.gsm")
in new stack
-- Executing [s at incoming:14] Dial("Zap/4-1", "ZAP/1r1||tr") in new
stack
-- Called 1r1
== Begin MixMonitor Recording Zap/4-1
-- Zap/1-1 is ringing
-- Hungup 'Zap/1-1'
== Spawn extension (incoming, s, 14) exited non-zero on 'Zap/4-1'
-- Hungup 'Zap/4-1'
== End MixMonitor Recording Zap/4-1
== Starting post polarity CID detection on channel 4
-- Starting simple switch on 'Zap/4-1'
[Jun 4 09:21:27] NOTICE[9495]: chan_zap.c:6234 ss_thread: CallerID
number: 07875-284xxx, name: (null), flags=4
-- Executing [s at incoming:1] Verbose("Zap/4-1", "Incoming call from BT
line CallerID="" <07875284xxx>") in new stack
Incoming call from BT line CallerID="" <07875284xxx>
-- Executing [s at incoming:2] GotoIf("Zap/4-1", "0?3:8") in new stack
-- Goto (incoming,s,8)
-- Executing [s at incoming:8] GotoIf("Zap/4-1", "0?9:11") in new stack
-- Goto (incoming,s,11)
-- Executing [s at incoming:11] Set("Zap/4-1", "CALLERID(all)=Incoming
Main: <07875284xxx>") in new stack
-- Executing [s at incoming:12] NoOp("Zap/4-1", "Finish
if-if-incoming-1-2") in new stack
-- Executing [s at incoming:13] MixMonitor("Zap/4-1", "1212567685.2.gsm")
in new stack
-- Executing [s at incoming:14] Dial("Zap/4-1", "ZAP/1r1||tr") in new
stack
-- Called 1r1
== Begin MixMonitor Recording Zap/4-1
-- Zap/1-1 is ringing
-- Zap/1-1 is ringing
-- Zap/1-1 is ringing
-- Zap/1-1 is ringing
-- Hungup 'Zap/1-1'
== Spawn extension (incoming, s, 14) exited non-zero on 'Zap/4-1'
-- Hungup 'Zap/4-1'
== End MixMonitor Recording Zap/4-1
== Starting post polarity CID detection on channel 4
-- Starting simple switch on 'Zap/4-1'
[Jun 4 09:21:44] NOTICE[9497]: chan_zap.c:6234 ss_thread: CallerID
number: 07875-284xxx, name: (null), flags=4
-- Executing [s at incoming:1] Verbose("Zap/4-1", "Incoming call from BT
line CallerID="" <07875284xxx>") in new stack
Incoming call from BT line CallerID="" <07875284xxx>
-- Executing [s at incoming:2] GotoIf("Zap/4-1", "0?3:8") in new stack
-- Goto (incoming,s,8)
-- Executing [s at incoming:8] GotoIf("Zap/4-1", "0?9:11") in new stack
-- Goto (incoming,s,11)
-- Executing [s at incoming:11] Set("Zap/4-1", "CALLERID(all)=Incoming
Main: <07875284xxx>") in new stack
-- Executing [s at incoming:12] NoOp("Zap/4-1", "Finish
if-if-incoming-1-2") in new stack
-- Executing [s at incoming:13] MixMonitor("Zap/4-1", "1212567703.4.gsm")
in new stack
-- Executing [s at incoming:14] Dial("Zap/4-1", "ZAP/1r1||tr") in new
stack
-- Called 1r1
== Begin MixMonitor Recording Zap/4-1
-- Zap/1-1 is ringing
-- Zap/1-1 is ringing
-- Hungup 'Zap/1-1'
== Spawn extension (incoming, s, 14) exited non-zero on 'Zap/4-1'
-- Hungup 'Zap/4-1'
== End MixMonitor Recording Zap/4-1
Issue History
Date Modified Username Field Change
======================================================================
06-04-08 03:18 mattbrown Note Added: 0087776
======================================================================
More information about the asterisk-bugs
mailing list