[asterisk-bugs] [DAHDI-tools 0014061]: Wildcard TE122 Card recognition problem

[Asterisk Bug Tracker]

The following issue has been SUBMITTED. 
====================================================================== 
http://bugs.digium.com/view.php?id=14061 
====================================================================== 
Reported By:                copas2
Assigned To:                
====================================================================== 
Project:                    DAHDI-tools
Issue ID:                   14061
Category:                   General
Reproducibility:            always
Severity:                   block
Priority:                   normal
Status:                     new
====================================================================== 
Date Submitted:             2008-12-11 07:34 CST
Last Modified:              2008-12-11 07:34 CST
====================================================================== 
Summary:                    Wildcard TE122 Card recognition problem
Description: 
Dahdi tools can not recognize the Wildcard TE122 as an E1 card (if
configured so by the jumper on the card) because it reads "Span 1: WCT1/0
"Wildcard TE122 Card 0" (MASTER) HDB3/CCS/CRC4 RED" as the card name
($head) in Span.pm. Problem seems to be that the T1 in "WCT1/0" confuses
the tool and it reports that 31 channels are too many for a T1 span :-)
After changing the wcT1 to someting else in the variable $head, it seems
to be working fine.
====================================================================== 

Issue History 
Date Modified    Username       Field                    Change               
====================================================================== 
2008-12-11 07:34 copas2         New Issue                                    
======================================================================