[asterisk-bugs] dahdi_hardware detects T1 instead of E1 / Span.pm
Martin Dorigatti
martin.dorigatti at scs.ch
Tue Dec 2 09:58:04 CST 2008
I tried to configure E1 in the xpp.conf, however, Span.pm always dies with
the same error:
Whare can I change that?
Some output:
[root at localhost]# dahdi_hardware
31 channels in a T1 span at
/usr/local/lib/perl5/site_perl/5.10.0/Dahdi/Span.pm line 241.
[root at localhost]# dahdi_genconf
31 channels in a T1 span at
/usr/local/lib/perl5/site_perl/5.10.0/Dahdi/Span.pm line 241.
[root at localhost]# dahdi_scan
[1]
active=yes
alarms=OK
description=Wildcard TE121 Card 0
name=WCT1/0
manufacturer=Digium
devicetype=Wildcard TE121 with VPMADT032
location=PCI Bus 05 Slot 09
basechan=1
totchans=31
irq=16
type=digital-E1
syncsrc=0
lbo=0 db (CSU)/0-133 feet (DSX-1)
coding_opts=HDB3
framing_opts=CCS,CRC4
coding=HDB3
framing=CCS
[root at localhost]# cat /proc/dahdi/1
Span 1: WCT1/0 "Wildcard TE121 Card 0" (MASTER) HDB3/CCS/CRC4
IRQ misses: 1
1 WCT1/0/1 Clear (EC: MG2)
2 WCT1/0/2 Clear (EC: MG2)
3 WCT1/0/3 Clear (EC: MG2)
4 WCT1/0/4 Clear (EC: MG2)
5 WCT1/0/5 Clear (EC: MG2)
6 WCT1/0/6 Clear (EC: MG2)
7 WCT1/0/7 Clear (EC: MG2)
8 WCT1/0/8 Clear (EC: MG2)
9 WCT1/0/9 Clear (EC: MG2)
10 WCT1/0/10 Clear (EC: MG2)
11 WCT1/0/11 Clear (EC: MG2)
12 WCT1/0/12 Clear (EC: MG2)
13 WCT1/0/13 Clear (EC: MG2)
14 WCT1/0/14 Clear (EC: MG2)
15 WCT1/0/15 Clear (EC: MG2)
16 WCT1/0/16 HDLCFCS
17 WCT1/0/17 Clear (EC: MG2)
18 WCT1/0/18 Clear (EC: MG2)
19 WCT1/0/19 Clear (EC: MG2)
20 WCT1/0/20 Clear (EC: MG2)
21 WCT1/0/21 Clear (EC: MG2)
22 WCT1/0/22 Clear (EC: MG2)
23 WCT1/0/23 Clear (EC: MG2)
24 WCT1/0/24 Clear (EC: MG2)
25 WCT1/0/25 Clear (EC: MG2)
26 WCT1/0/26 Clear (EC: MG2)
27 WCT1/0/27 Clear (EC: MG2)
28 WCT1/0/28 Clear (EC: MG2)
29 WCT1/0/29 Clear (EC: MG2)
30 WCT1/0/30 Clear (EC: MG2)
31 WCT1/0/31 Clear (EC: MG2)
More information about the asterisk-bugs
mailing list