[asterisk-bugs] [Zaptel 0010673]: Zaptel fxo card is not working with Trixbox 2.3.0.2 beta

[noreply at bugs.digium.com]

The issue 0010674 has been set as DUPLICATE OF the following issue. 
====================================================================== 
http://bugs.digium.com/view.php?id=10673 
====================================================================== 
Reported By:                mjunaidzafar
Assigned To:                
====================================================================== 
Project:                    Zaptel
Issue ID:                   10673
Category:                   General
Reproducibility:            always
Severity:                   major
Priority:                   normal
Status:                     new
Zaptel Version:             1.4.5.1  
SVN Branch (only for SVN checkouts, not tarball releases): N/A  
SVN Revision (number only!):  
Disclaimer on File?:        N/A 
Request Review:              
====================================================================== 
Date Submitted:             09-08-2007 10:00 CDT
Last Modified:              09-08-2007 11:30 CDT
====================================================================== 
Summary:                    Zaptel fxo card is not working with Trixbox 2.3.0.2
beta
Description: 
I have installed trixbox 2.3.0.2 beta with one fxo card, configuration is
as under:
zaptel.conf
fxsks=3
loadzone = us
defaultzone = us

zapata.conf
[trunkgroups]

[channels]

language=en
#context=from-zaptel
context=fax
group=0
channel => 3
signalling=fxs_ks
irxwink=300

output of zfcfg -vvvvvvvvvvvv is
Channel 03: FXS Kewlstart (Default) (Slaves: 03)
1 channels configured.

while dialing from pstn, asterisk not detect the call and while dialing
from sip extention to pstn following error occur in logs
channel.c: No channel type registered for 'ZAP'

I have tried with "genzaptelconf -vvvvvvvvvvvvv" and it displays

Channel map:

Channel 03: FXS Kewlstart (Default) (Slaves: 03)
Channel 04: FXS Kewlstart (Default) (Slaves: 04)

2 channels configured.

Unloading zaptel hardware drivers:
Unloading ztdummy: [ OK ]
Unloading wctdm: [ OK ]
Unloading wcfxo: [ OK ]
Unloading wcte11xp: [ OK ]
Unloading wct1xxp: [ OK ]
Unloading wct4xxp: [ OK ]
Unloading tor2: [ OK ]
Removing zaptel module: ERROR: Module zaptel is in use by zttranscode
[FAILED]
Loading zaptel framework: [ OK ]
Waiting for zap to come online: [ OK ]
Loading zaptel hardware modules:
Loading tor2: [ OK ]
Loading wct4xxp: [ OK ]
Loading wct1xxp: [ OK ]
Loading wcte11xp: [ OK ]
Loading wcfxo: [ OK ]
Loading wctdm: [ OK ]
Loading ztdummy: [ OK ]
Running ztcfg: [ OK ]

then it start asterisk. at the end it displays "No such command 'zap show'
and then i found by entering zap commands in asterisk that asterisk is not
recognizing any zap command.
Same configuratin and harware works perfectly with trixbox-2.2.4

any idea to solve this problem

Regards,
Juni
======================================================================
Relationships       ID      Summary
----------------------------------------------------------------------
has duplicate       0010674 Zaptel fxo card is not working with Tri...
====================================================================== 

Issue History 
Date Modified   Username       Field                    Change               
====================================================================== 
09-08-07 13:16  Corydon76      Relationship added       has duplicate 0010674
======================================================================