[asterisk-bugs] [Asterisk 0010647]: SIP Reinvite behaviour does not work as expected with certain dial() options

[noreply at bugs.digium.com]

The following issue requires your FEEDBACK. 
====================================================================== 
http://bugs.digium.com/view.php?id=10647 
====================================================================== 
Reported By:                samdell3
Assigned To:                
====================================================================== 
Project:                    Asterisk
Issue ID:                   10647
Category:                   Core/RTP
Reproducibility:            always
Severity:                   minor
Priority:                   normal
Status:                     feedback
Asterisk Version:           1.4.11  
SVN Branch (only for SVN checkouts, not tarball releases): N/A  
SVN Revision (number only!):  
Disclaimer on File?:        N/A 
Request Review:              
====================================================================== 
Date Submitted:             09-05-2007 00:50 CDT
Last Modified:              09-05-2007 08:01 CDT
====================================================================== 
Summary:                    SIP Reinvite behaviour does not work as expected
with certain dial() options
Description: 
With canreinvite=no on any SIP peer, the call is never reinvited (this is
correct behaviour)

With canreinvite=yes, and using with a Dial() option from below,
re-invites are not issued correctly. (actually, reinvites should not be
issued at all...)

Asterisk is not supposed to perform a re-invite when using any of the
following Dial() options: t, T, h, H, w, W or L (with multiple arguments)
This is not the case. 
Asterisk still issues a Re-invite to one of the call legs causing an
asytmetrical RTP traffic flow (causing one-way audio if the SIP peer
filters RTP packets coming from somehwere that was not in it's own SDP)

EG 
SIPPeerA------ASTERISK-----SIPPeerB

SIPPeerA calls SIPPeerB

If either or both SIPPeerA or SIPPeerB have canreinvite=no, the RTP flow
is always via Asterisk - this is correct.

If Both SIPPeers are canreinvite=yes, AND the dial command contains any of
the above dial() options, then the RTP flow forms a triangle due to a
single re-invite STILL being issued by Asterisk. EG A's RTP goes to
Asterisk, Asterisk's RTP goes to B, but B's RTP goes to A. This is because
Asterisk issues a re-invite and tells B to talk to A when it shouldn't. 
If Asterisk does issue a re-invite for one leg, it should issue a
re-invite for both legs! But in this case it should not issues any
re-invites at all.
====================================================================== 

---------------------------------------------------------------------- 
 file - 09-05-07 08:01  
---------------------------------------------------------------------- 
I was unable to reproduce this strange behavior... below is what I got so
please attach a sip.conf and console output with debug enabled.

t and T options:
No native bridge is attempted.

h, H, w, and W options:

Packet2Packet bridge is attempted (NOT a reinvite, still stays through
Asterisk).

L with 1 option:

Native bridge (which is fine).

L with 2+ options:

Does not even attempt to native bridge or Packet2Packet bridge.

 

Issue History 
Date Modified   Username       Field                    Change               
====================================================================== 
09-05-07 08:01  file           Note Added: 0069960                          
09-05-07 08:01  file           Status                   new => feedback     
======================================================================