[asterisk-bugs] [Zaptel 0011127]: TE212P+VPM450M: VPM450M can't inizialize

[noreply at bugs.digium.com]

The following issue has been ASSIGNED. 
====================================================================== 
http://bugs.digium.com/view.php?id=11127 
====================================================================== 
Reported By:                DanilaPisarev
Assigned To:                mattf
====================================================================== 
Project:                    Zaptel
Issue ID:                   11127
Category:                   wct4xxp
Reproducibility:            always
Severity:                   minor
Priority:                   normal
Status:                     assigned
Zaptel Version:             1.4.5.1  
SVN Branch (only for SVN checkouts, not tarball releases): N/A  
SVN Revision (number only!):  
Disclaimer on File?:        N/A 
Request Review:              
====================================================================== 
Date Submitted:             10-31-2007 04:10 CDT
Last Modified:              10-31-2007 09:25 CDT
====================================================================== 
Summary:                    TE212P+VPM450M: VPM450M can't inizialize
Description: 
try to load default firmware for 64 channels:

VPM450: get_vpm450m_capacity() = 64
VPM450: echo cancellation for 128 channels
VPM450: firmware->data='EDS3_IMAGE_NAME=DIGIUM_4_CAPACITY:64
EDS3_IMAGE_VERSION=01.05.01
EDS3_IMAGE_DATE=Mon Jul 10 11:53:12  2006'

stop in Oct6100ApiInitChannels

Verify that the image supports all the requested channels.

ChipConfig.usMaxChannels=128 ImageInfo.usMaxNumberOfChannels=65

if ( pSharedInfo->ChipConfig.usMaxChannels >
pSharedInfo->ImageInfo.usMaxNumberOfChannels )
return cOCT6100_ERR_NOT_SUPPORTED_OPEN_MAX_ECHO_CHANNELS_VALUE;

Failed to open chip, code 001ff016!
VPM450: Failed to initialize

try to load 128 channels firmware

VPM450: get_vpm450m_capacity() = 64
hotplug firmware zaptel-fw-oct6114-128.bin
VPM450: echo cancellation for 128 channels
VPM450: firmware->data='EDS3_IMAGE_NAME=DIGIUM_3_CAPACITY:128
EDS3_IMAGE_VERSION=01.05.01
EDS3_IMAGE_DATE=Mon Feb 20 15:52:59  2006'

stop in oct6100_chip_open.c

/* Either the firmware image was not loaded correctly (from pointer given
by user) */
/* or the channel capacity pins of the chip do not match what the firmware
is expecting. */
if ( ( usReadData & 0x4 ) == 0 )
return cOCT6100_ERR_OPEN_INVALID_FIRMWARE_OR_CAPACITY_PINS;

Failed to open chip, code 00103042!
VPM450: Failed to initialize

without vpm450m work fine, with vpm450m without trying firmware - work
fine.

PS work on:
opensuse 10.2 x64, 
http://downloads.digium.com/pub/libpri/libpri-1.4.2.tar.gz ,
http://downloads.digium.com/pub/zaptel/zaptel-1.4.6.tar.gz ,
supermicro server (if need - can describe)


====================================================================== 

Issue History 
Date Modified   Username       Field                    Change               
====================================================================== 
10-31-07 09:25  file           Status                   new => assigned     
10-31-07 09:25  file           Assigned To               => mattf           
======================================================================