[asterisk-bugs] [Asterisk 0011241]: Asterisk-1.4.13 :: chan_h323 :: callerid(name) / h323id not sent during setup message

[noreply at bugs.digium.com]

A NOTE has been added to this issue. 
====================================================================== 
http://bugs.digium.com/view.php?id=11241 
====================================================================== 
Reported By:                tusar
Assigned To:                
====================================================================== 
Project:                    Asterisk
Issue ID:                   11241
Category:                   Channels/chan_h323
Reproducibility:            always
Severity:                   minor
Priority:                   normal
Status:                     new
Asterisk Version:           1.4.13  
SVN Branch (only for SVN checkouts, not tarball releases): N/A  
SVN Revision (number only!):  
Disclaimer on File?:        N/A 
Request Review:              
====================================================================== 
Date Submitted:             11-14-2007 02:19 CST
Last Modified:              11-23-2007 15:14 CST
====================================================================== 
Summary:                    Asterisk-1.4.13 :: chan_h323 :: callerid(name) /
h323id not sent during setup message
Description: 
Asterisk-1.4.13 with chan_h323 is *not* sending callerid(name) / h323id
during *setup message . But Asterisk-1.2.x with chan_h323 is working fine
as expected.

PWLib-v1.10.0
OpenH323-v1.18.0

[test]
exten => _XXX,1,Wait,1
exten => _XXX,n,Set(CALLERID(name)=Tusar)
exten => _XXX,n,Set(CALLERID(num)=555555)
exten => _XXX,n,Dial(H323/${EXTEN}@xx.xx.xx.xx:1720,60)
exten => _XXX,n,Hangup


====================================================================== 

---------------------------------------------------------------------- 
 Laureano - 11-23-07 15:14  
---------------------------------------------------------------------- 
Tusar:
I investigated your report and I think that this bug could be related to
the commit http://bugs.digium.com/view.php?id=79174, which prevents a possible
memory leak when the
structures for a new channel are allocated.
As far I can see in the code, you could use the following string:
exten => _XXX,n,Dial(H323/${EXTEN}@xx.xx.xx.xx:1720/myH323ID,60)
to set the H.323 ID for this call. Can you please test this and provide me
any feedback? Be aware that I tested this workaround only in a development
box, so be careful if you are going to test this on a production box.

Thank you. 

Issue History 
Date Modified   Username       Field                    Change               
====================================================================== 
11-23-07 15:14  Laureano       Note Added: 0074251                          
======================================================================