No subject

it said.

- If am giving 
start => *,caller,Macro,start, it is working perfectly.
What could be the problem? Is there any limitation, should i have to give
only a single digit in the application map?

Kindly advice to find the root of the problem and to solve it.

regards
sasikala


====================================================================== 

---------------------------------------------------------------------- 
 (0096912) putnopvut (administrator) - 2008-12-23 12:35
 http://bugs.digium.com/view.php?id=14128#c96912 
---------------------------------------------------------------------- 
I suspect that this is a configuration problem. I would be willing to bet
that since this is working for you with a single digit, but not with
multiple digits, the problem is the featuredigittimeout in features.conf.
By default, this is set to 500 ms, meaning that only 500 ms is allowed
between DTMF presses when trying to activate a feature.

Try setting featuredigittimeout to something higher, like 2000. Your
problem will probably go away. 

Issue History 
Date Modified    Username       Field                    Change               
====================================================================== 
2008-12-23 12:35 putnopvut      Note Added: 0096912                          
2008-12-23 12:35 putnopvut      Status                   new => feedback     
======================================================================